Siemens 6ES7461-3AA00-7AA0 S7-400 IM 461-3 Terminating Connector
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the connector assigned to the IM 461-3 receiver.
- Order the receiver and connecting cables separately when required.
- Keep total cable length within the 102.25 m limit of the associated interface arrangement.
- Use the separate IM 461-0 connector for local expansion receivers.
6ES7461-3AA00-7AA0 S7-400 IM 461-3 Terminating Connector
The receiver termination accessory for an IM 461-3 expansion arrangement, with an approximate net weight of 74 g.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7461-3AA00-7AA0 |
| Product Type | Bus termination accessory |
| Core Function | Closing the receiver-side expansion chain |
| Application | IM 461-3 remote expansion interfaces |
Receiver accessory
The connector is assigned to the IM 461-3 receive interface.
Remote rack system
The associated IM 460-3 and IM 461-3 pair carries the P-bus and C-bus.
Separate component
The terminating connector is ordered separately from the receive interface and connecting cable.
Product Overview
6ES7461-3AA00-7AA0 is the terminating connector assigned to the S7-400 IM 461-3 receive interface. It completes the receiver-side expansion connection and is a separate accessory from the interface module itself.
The IM 461-3 system uses an IM 460-3 sender and 468-1 connecting cables for remote rack expansion with P-bus and C-bus transmission. Select this connector for that receiver arrangement rather than for the local IM 461-0 termination.
Key Functions
Terminate the receiver connection
The connector is the designated termination accessory for the IM 461-3 interface.
Complete a remote expansion arrangement
The associated interface pair supports remote S7-400 expansion using the 468-1 cable family.
Preserve the correct accessory allocation
The IM 461-3 connector has its own article number and is not the IM 461-0 terminating connector.
Official Specifications
| Approximate net weight | 74 g |
|---|---|
| Operating temperature (S7-400 system) | 0 to +60 °C |
| Maximum temperature change (S7-400 system) | 10 °C per hour |
| Operating humidity (S7-400 system) | Up to 95% RH at +25 °C; no condensation |
| Operating air pressure (S7-400 system) | 795 to 1,080 hPa, corresponding to -1,000 to +2,000 m relative to sea level |
| Vibration qualification (S7-400 system) | IEC 60068-2-6; 0.075 mm amplitude from 10 Hz to below 58 Hz, then 1 g from 58 Hz to below 500 Hz |
| Shock qualification (S7-400 system) | IEC 60068-2-29; half-sine pulses at 10 g for 6 ms; 100 shocks along each of three orthogonal axes |
| Degree of protection (S7-400 system) | IP20 under IEC 60529; no water-ingress protection |
Frequently Asked Questions
Does 6ES7461-3AA00-7AA0 replace a complete IM 461-3 receive interface?
The item is the terminating connector and the receive interface is a separate component.
Which sender should be paired with the receiver that uses 6ES7461-3AA00-7AA0?
The IM 461-3 receive interface is used exclusively with an IM 460-3 sender.
Which cable family belongs to the remote expansion arrangement using 6ES7461-3AA00-7AA0?
The IM 460-3 and IM 461-3 interfaces use 468-1 connecting cables.
Can the interface arrangement associated with 6ES7461-3AA00-7AA0 transmit the communication bus?
The IM 460-3 and IM 461-3 arrangement transmits both the P-bus and the C-bus.
What total cable length applies to the expansion arrangement using 6ES7461-3AA00-7AA0?
The maximum total cable length between the first and last interface is 102.25 m.
Should I order 6ES7461-3AA00-7AA0 when the receiver is an IM 461-0?
The IM 461-0 uses a different terminating connector with its own article assignment.
How much weight should I allow for 6ES7461-3AA00-7AA0 itself?
The connector has an approximate net weight of 74 g.