Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7461 0aa00 7aa0 s7 400 im 461 0 terminating connector-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7461-0AA00-7AA0 S7-400 IM 461-0 Terminating Connector

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC S7-400

6ES7461-0AA00-7AA0 S7-400 IM 461-0 Terminating Connector

The line-end terminating connector for an IM 461-0 receive interface in a local S7-400 expansion arrangement.

At a Glance

Brand Siemens
Model 6ES7461-0AA00-7AA0
Product Type Bus terminating connector
Core Function Termination of a local expansion line
Application IM 461-0 receive-interface installations

Last expansion rack

Termination is fitted at the end of the expansion line.

Lower front connection

The connector occupies the lower front connection of the final receive interface.

Correct interface variant

The terminating connector is assigned to the IM 461-0 receive interface.

Product Overview

6ES7461-0AA00-7AA0 terminates a local expansion line that ends at an IM 461-0 receive interface. The compact connector is an accessory for the SIMATIC S7-400 expansion system, rather than an additional receive interface module.

The final expansion rack on a line must carry the appropriate terminator at the lower front connection of its receive interface. Intermediate racks remain connected through the expansion cabling, while unused send-interface connections do not require termination.

Ordering focus: Identify the receive-interface variant and the last rack in the expansion line before selecting the terminating connector.
Key Functions

Complete the expansion-line end

The connector provides the required termination at the final expansion rack of an IM 461-0 line.

Preserve the connection arrangement

Install the terminating connector in the lower front connection of the last receive interface.

Match the receive-interface variant

Use the terminating connector assigned to IM 461-0 when maintaining the local S7-400 expansion arrangement.

Official Specifications
Approximate connector weight 80 g
Operating temperature (S7-400 system) 0 to +60 °C
Maximum temperature change (S7-400 system) 10 °C per hour
Relative humidity (S7-400 system) Maximum 95% at +25 °C, non-condensing
Operating air pressure (S7-400 system) 795–1080 hPa, corresponding to an elevation of −1000 to +2000 m
Vibration qualification (S7-400 system) IEC 60068-2-6; 0.075 mm amplitude at 10 ≤ f < 58 Hz and 1 g acceleration at 58 ≤ f < 500 Hz
Shock qualification (S7-400 system) IEC 60068-2-29; half-sine pulses, 10 g peak for 6 ms, 100 shocks in each of three mutually perpendicular axes
Degree of protection (S7-400 system) IP20 to IEC 60529; no water ingress protection
Frequently Asked Questions

Where should I fit 6ES7461-0AA00-7AA0 in an S7-400 expansion line?

Fit the connector in the lower front connection of the receive interface in the last expansion rack on the line.

Does every intermediate rack need 6ES7461-0AA00-7AA0?

Termination is required at the last expansion rack of a line rather than at each intermediate rack.

Should I use 6ES7461-0AA00-7AA0 to close an unused send-interface connection?

Unused front connections of a send interface do not require termination.

Which receive-interface variant is assigned to 6ES7461-0AA00-7AA0?

The terminating connector is assigned to the IM 461-0 receive interface.

Does an IM 461-1 installation require 6ES7461-0AA00-7AA0?

The IM 461-1 receive interface does not require a terminator.

What total local-line length applies when using 6ES7461-0AA00-7AA0 with IM 460-0 and IM 461-0?

The maximum total line length for that local connection is 5 m.

Can 6ES7461-0AA00-7AA0 replace a missing receive-interface module?

The part is a terminating connector and does not replace the IM 461-0 receive interface.

Compatibility & Ordering Notes
Before ordering 6ES7461-0AA00-7AA0: Select the terminator for IM 461-0 and fit it at the final receive interface, preserving the specified local expansion cabling.

Compatibility Checklist for 6ES7461-0AA00-7AA0

  • Identify the last expansion rack on the line.
  • Use the lower front connection of the last receive interface.
  • Keep the IM 460-0/IM 461-0 local line within its 5 m total-length limit.
  • Use the separate terminating-connector variants specified for other receive interfaces.
Hot Selling Models
R167189410
VTO+ 236-4E
GV3L40
GHG4111
4.5T-20-RSE 4.5T/S3060 U2-16619
M74314-B5
6ES5 430-4UA14
1300480107
3RV1042-4BA10
SMC30 6SL3055-0AA00-5CA2
ADVU-25-85-PA
3TH42 80-0AD0
VUVG-L10-B52-T-M7-1P3 566475 + 6 个 VAVE-L1-1VH3-LP
6ES5301-3AB13
3RV2021-4DA20 E:03 3RV2901-2E

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.