EN
Siemens SIMATIC S7-400 6ES7416-3XR05-0AB0 CPU 416-3 DP
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
6ES7416-3XR05-0AB0 CPU 416-3 DP central processing unit
High-performance S7-400 CPU with separated code/data memory, two PROFIBUS-capable interfaces and an IFM slot.
At a Glance
| Manufacturer | Siemens |
|---|---|
| Article Number | 6ES7416-3XR05-0AB0 |
| Product Type | CPU 416-3 DP central processing unit |
| Core Function | Executes high-performance S7-400 control with dual PROFIBUS DP capability |
| Application / Compatible Series | Large modular S7-400 automation systems |
Exact Identification
Match the complete article number and installed hardware revision.
System Fit
Verify the specified platform, interface set and engineering environment.
Configuration Check
Confirm cabinet, connectors and required accessories before replacement.
Product Overview
iz6ES7416-3XR05-0AB0 is identified by Siemens as a CPU 416-3 DP central processing unit in the SIMATIC S7-400 family. High-performance S7-400 CPU with separated code/data memory, two PROFIBUS-capable interfaces and an IFM slot.
Its primary role is to executes high-performance S7-400 control with dual PROFIBUS DP capability. The complete article number, hardware revision and installed configuration should be matched before a replacement is introduced into Large modular S7-400 automation systems.
Key Functions
Deterministic PROFIBUS Operation
Constant bus cycle time and isochronous processing support coordinated, time-critical distributed I/O tasks.
Direct Data Exchange
Send and receive capability enables direct data exchange across the configured PROFIBUS system.
Network Routing and Record Transfer
Routing and the integrated data-record gateway support communication across the configured S7 network.
Official Specifications
| Firmware Version | V5.3 |
|---|---|
| Work Memory | 11.2 MB total (5.6 MB code and 5.6 MB data) |
| Communication Interfaces | 1 x MPI/DP up to 12 Mbit/s; 1 x PROFIBUS DP; 1 x slot for a plug-in IF module |
| External Backup Voltage | 5 to 15 V DC |
| Maximum Connections | 64 |
| Digital I/O Address Area | 16 KB |
| Program Block Limits | Up to 10,000 data blocks; 5,000 function blocks; 5,000 functions |
| Instruction Execution Times | 30 ns for bit, word and integer operations; 90 ns for floating-point operations |
| S7 Timers and Counters | 2,048 each |
| Memory Card Capacity | Up to 64 MB |
Frequently Asked Questions
Which installed rack and engineering release are compatible with 6ES7416-3XR05-0AB0?
SIMATIC S7-400 hardware must use the documented rack, power supply and the corresponding Siemens engineering environment; verify the hardware catalog entry and firmware level.
How should memory compatibility be checked for 6ES7416-3XR05-0AB0?
Compare program and data work memory, load-memory medium, retentive areas and any required Siemens memory card before restoring the project.
What network interfaces need verification before installing 6ES7416-3XR05-0AB0?
MPI/DP, up to 12 Mbit/s must match the configured bus addresses, connectors, transmission settings and distributed-I/O topology.
Can 6ES7416-3XR05-0AB0 be exchanged without changing the control program?
A like-for-like exchange still requires the same article number, firmware and hardware configuration; archive the project and diagnostic data before removal.
What power-off procedure should engineers follow for 6ES7416-3XR05-0AB0?
Stop the process safely, isolate rack power, observe ESD precautions, label connectors and preserve the memory or backup arrangement before withdrawing the CPU.
Which commissioning checks are essential after replacing 6ES7416-3XR05-0AB0?
Verify startup diagnostics, operating mode, I/O reachability, fieldbus status, time settings, alarms and the process image before returning the machine to service.
How is 6ES7416-3XR05-0AB0 applied in an automation system?
It serves as the central controller for Large modular S7-400 automation systems, executing the user program and coordinating the configured communication and I/O resources.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7416-3XR05-0AB0
- Match the complete suffix and installed Siemens product family.
- Confirm Large modular S7-400 automation systems and the current hardware configuration.
- Verify the documented communication, power and engineering requirements.
- Confirm all required connectors, memory media, mounting parts and accessories.
