EN
Siemens SIMATIC S7-400 6ES7416-3XL04-0AB0 CPU 416-3
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the complete order number, firmware generation and two-slot rack position.
- Confirm the STEP 7 hardware catalog entry and archive the current project before replacement.
- Record MPI/DP addresses, bus rates, termination and any installed IF 964-DP module.
- Verify the memory-card type and test every configured communication connection after startup.
6ES7416-3XL04-0AB0 CPU 416-3 central processing unit
CPU 416-3 with 5.6 MB work memory, two integrated PROFIBUS-capable interfaces and one slot for an IF 964-DP interface module.
At a Glance
| Manufacturer | Siemens |
|---|---|
| Article Number | 6ES7416-3XL04-0AB0 |
| Product Type | CPU 416-3 central processing unit |
| Core Function | Executes S7-400 control programs and coordinates MPI/PROFIBUS DP networks |
| Application / Compatible Series | SIMATIC S7-400 central racks engineered with STEP 7 Classic |
Product Overview
Siemens identifies 6ES7416-3XL04-0AB0 as a SIMATIC S7-400 CPU 416-3. The controller provides 2.8 MB of program work memory and 2.8 MB of data work memory for modular automation systems.
Its first interface supports MPI/PROFIBUS DP, the second supports PROFIBUS DP, and a third interface slot accepts an IF 964-DP module. Engineering requires STEP 7 V5.2 SP1 HF3 or higher with the applicable hardware update.
Key Functions
Large S7-400 Memory
Separates 5.6 MB of work memory equally between program code and process data.
Distributed I/O Control
Provides integrated PROFIBUS DP master/device functions at transmission rates up to 12 Mbit/s.
Configuration in RUN
Supports CiR for approved hardware changes while the automation system remains in operation.
Official Specifications
| Firmware Version | V4.0 |
|---|---|
| Engineering Software | STEP 7 V5.2 SP1 HF3 or higher with hardware update |
| CiR Basic Synchronization Time | 100 ms |
| CiR Time per I/O Byte | 40 us |
| Supply Method | Via the S7-400 system power supply |
| Backplane Current at 5 V DC, Typical | 1.2 A |
| Backplane Current at 5 V DC, Maximum | 1.4 A |
| Power Loss, Typical | 5 W |
| Program Work Memory | 2,800 kB |
| Data Work Memory | 2,800 kB |
| Expandable FEPROM Load Memory | Up to 64 MB with FLASH memory card |
| Expandable RAM Load Memory | Up to 64 MB with RAM memory card |
| Adjustable Input Process Image | Up to 16 kB |
| Adjustable Output Process Image | Up to 16 kB |
| Subprocess Images | Up to 15 |
| Expansion Units | Up to 21, including 6 with K-bus |
| Required Rack Slots | 2 |
| Diagnostic Buffer Entries | Up to 3,200 |
| Dimensions (W x H x D) | 50 x 290 x 219 mm |
| Approximate Weight | 1,070 g |
Frequently Asked Questions
Which STEP 7 release is required to engineer 6ES7416-3XL04-0AB0?
Use STEP 7 V5.2 SP1 HF3 or higher and install the matching hardware update before opening or transferring the project.
How should the work memory be checked when replacing 6ES7416-3XL04-0AB0?
Confirm that the project fits within 2.8 MB for program code and 2.8 MB for data, then compare memory-card requirements and retentive settings.
Which PROFIBUS roles can 6ES7416-3XL04-0AB0 perform?
The two integrated fieldbus interfaces can operate as DP masters or DP devices; the first interface also supports MPI communication.
What rack space is needed for 6ES7416-3XL04-0AB0?
Reserve two S7-400 rack slots and maintain the specified clearances for the 50 x 290 x 219 mm module.
Can the I/O configuration be changed during operation with 6ES7416-3XL04-0AB0?
Configuration in RUN is supported for approved changes; validate the hardware configuration and synchronization timing before applying modifications.
What should be backed up before exchanging 6ES7416-3XL04-0AB0?
Archive the STEP 7 project, hardware configuration, user program, communication parameters and the contents of the installed memory card.
Which commissioning checks are appropriate for 6ES7416-3XL04-0AB0?
Check rack addressing, battery and memory status, diagnostic buffer entries, MPI/DP communication and all process I/O before returning the system to service.
