EN
Siemens SIMATIC S7-400 6ES7416-3XL04-0AB0 CPU 416-3
Fabricator: Siemens
Status: Novissimum
Tempus Expectatus: In Stoc
Origo: Germania
Praestatio: 12 menses
Email: [email protected]
whatsapp: +86-18150117685
- Praevisio
- Hot Selling Models
- Pròdòt ràccumandà
Praevisio
- Match the complete order number, firmware generation and two-slot rack position.
- Confirm the STEP 7 hardware catalog entry and archive the current project before replacement.
- Record MPI/DP addresses, bus rates, termination and any installed IF 964-DP module.
- Verify the memory-card type and test every configured communication connection after startup.
6ES7416-3XL04-0AB0 CPU 416-3 central processing unit
CPU 416-3 with 5.6 MB work memory, two integrated PROFIBUS-capable interfaces and one slot for an IF 964-DP interface module.
At a Glance
| Fabricator | Siemens |
|---|---|
| Numerus Articuli | 6ES7416-3XL04-0AB0 |
| Product Type | CPU 416-3 central processing unit |
| Functio principalis | Executes S7-400 control programs and coordinates MPI/PROFIBUS DP networks |
| Application / Compatible Series | SIMATIC S7-400 central racks engineered with STEP 7 Classic |
Productum Overview
Siemens identifies 6ES7416-3XL04-0AB0 as a SIMATIC S7-400 CPU 416-3. The controller provides 2.8 MB of program work memory and 2.8 MB of data work memory for modular automation systems.
Its first interface supports MPI/PROFIBUS DP, the second supports PROFIBUS DP, and a third interface slot accepts an IF 964-DP module. Engineering requires STEP 7 V5.2 SP1 HF3 or higher with the applicable hardware update.
Functiones Principales
Magnus S7-400 Memoria
Dividit 5,6 MB memoriae operativae aequamente inter codicem programmatum et datos processus.
Controllo Distributus I/O
Praebet functiones integratas PROFIBUS DP magistri/apparatus ad velocitates transmissionis usque ad 12 Mbit/s.
Configuratio in RUN
Favet CiR pro mutationibus hardware approbatis dum systema automationis in operatione manet.
Official Specifications
| Versio Firmamentalis | V4.0 |
|---|---|
| Software Ingeniorium | STEP 7 V5.2 SP1 HF3 aut superior cum actualisatione hardware |
| CiR Basic Synchronization Time | 100 ms |
| Tempus CiR per byte I/O | 40 μs |
| Mēthodus Alimentī | Per alimentationem systematis S7-400 |
| Currens dorsalis ad 5 V DC, typica | 1,2 A |
| Currens dorsalis ad 5 V DC, maxima | 1,4 A |
| AMISSIO POTENTIAE, TYPICA | 5 w |
| Memoria Laboris Programmatum | 2 800 kB |
| Memoria Laboris Datarum | 2 800 kB |
| Memoria Onusti FEPROM Expandibilis | Usque ad 64 MB cum schedula memoriae FLASH |
| Memoria RAM pro Onere Ampliabilis | Usque ad 64 MB cum schedula memoriae RAM |
| Imago Processus Input Variabilis | Usque ad 16 kB |
| Imago Processus Output Variabilis | Usque ad 16 kB |
| Imagines Subprocessuum | Usque ad 15 |
| Unitates expansionis | Usque ad 21, inter quas 6 cum K-bus |
| Interstitia Armaturae Requiruntur | 2 |
| Diagnostic Buffer Entries | Up to 3,200 |
| Dimensiones (L x A x P) | 50 x 290 x 219 mm |
| Pondus Approximatum | 1,070 g |
FREQUENTLY ASKED QUESTIONS
Which STEP 7 release is required to engineer 6ES7416-3XL04-0AB0?
Use STEP 7 V5.2 SP1 HF3 or higher and install the matching hardware update before opening or transferring the project.
How should the work memory be checked when replacing 6ES7416-3XL04-0AB0?
Confirm that the project fits within 2.8 MB for program code and 2.8 MB for data, then compare memory-card requirements and retentive settings.
Which PROFIBUS roles can 6ES7416-3XL04-0AB0 perform?
The two integrated fieldbus interfaces can operate as DP masters or DP devices; the first interface also supports MPI communication.
What rack space is needed for 6ES7416-3XL04-0AB0?
Reserve two S7-400 rack slots and maintain the specified clearances for the 50 x 290 x 219 mm module.
Can the I/O configuration be changed during operation with 6ES7416-3XL04-0AB0?
Configuration in RUN is supported for approved changes; validate the hardware configuration and synchronization timing before applying modifications.
What should be backed up before exchanging 6ES7416-3XL04-0AB0?
Archive the STEP 7 project, hardware configuration, user program, communication parameters and the contents of the installed memory card.
Which commissioning checks are appropriate for 6ES7416-3XL04-0AB0?
Check rack addressing, battery and memory status, diagnostic buffer entries, MPI/DP communication and all process I/O before returning the system to service.
