Siemens SIMATIC S7-400 6ES7414-3EM07-0AB0 CPU 414-3 PN/DP 4 MB
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMATIC S7-400 - PROFINET/PROFIBUS CPU
6ES7414-3EM07-0AB0 CPU 414-3 PN/DP 4 MB
Official Siemens identification and technical data for 6ES7414-3EM07-0AB0, prepared for accurate replacement matching and quotation.
At a Glance
| Article Number | 6ES7414-3EM07-0AB0 |
| Manufacturer | Siemens |
| Platform | SIMATIC S7-400 |
| Product Type | CPU 414-3 PN/DP 4 MB |
| Official Configuration | 4 MB work memory, divided into 2 MB code and 2 MB data memory |
Exact Identification
Match the complete Siemens article number 6ES7414-3EM07-0AB0 and the installed hardware configuration.
Official Configuration
4 MB work memory, divided into 2 MB code and 2 MB data memory.
Connection Check
MPI/DP at 12 Mbit/s, Ethernet/PROFINET and one IF964-DP plug-in interface.
Product Overview
6ES7414-3EM07-0AB0 is officially identified by Siemens as CPU 414-3 PN/DP Central Processing Unit in the SIMATIC S7-400 product range.
Siemens identifies this CPU 414-3 PN/DP with 4 MB work memory, split into 2 MB code and 2 MB data, plus MPI/DP, Ethernet/PROFINET and IF964-DP plug-in interfaces.
Ordering focus: verify the complete 6ES7414-3EM07-0AB0 article number, installed hardware configuration, connections and Siemens system documentation before replacement.
Key Functions
Model-Specific Configuration
6ES7414-3EM07-0AB0: 4 MB work memory, divided into 2 MB code and 2 MB data memory.
System Connection
MPI/DP at 12 Mbit/s, Ethernet/PROFINET and one IF964-DP plug-in interface.
Replacement Control
Use the full 6ES7414-3EM07-0AB0 article number and official Siemens documentation to verify the installed configuration before replacement.
Official Specifications
| HW Functional Status | 01 |
|---|---|
| Firmware Version | V7.0 |
| Engineering Software | STEP 7 V5.5 or higher with HSP 262 |
| Program Work Memory | 2 MB |
| Data Work Memory | 2 MB |
| Expandable Load Memory | Flash or RAM Memory Card; up to 64 MB |
| Bit Operation Time | 18.75 ns |
| Floating-Point Operation Time | 37.5 ns |
| MPI / PROFIBUS DP Data Rate | Up to 12 Mbit/s |
| PROFINET Connection | 2 RJ45 ports with integrated switch |
| PROFINET Data Rate | Up to 100 Mbit/s |
| Connectable PROFINET IO Devices | Up to 256 |
| Isochronous Mode | Supported via PROFIBUS DP or PROFINET |
| Backplane Current at 5 V DC | 1.3 A typical; 1.6 A maximum |
| 24 V DC Interface Current | 300 mA maximum; 150 mA per DP interface |
| Typical Power Loss | 6.5 W |
| External Backup Voltage | 5 to 15 V DC |
Official source: Siemens Industry Mall product data for 6ES7414-3EM07-0AB0. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
Can 6ES7414-3EM07-0AB0 control PROFINET IO devices directly?
Yes. The integrated Ethernet/PROFINET interface operates as an IO controller and supports a switched two-port connection.
Which memory split matters when migrating to 6ES7414-3EM07-0AB0?
Check the compiled program and data usage separately because the available work memory is divided into 2 MB for code and 2 MB for data.
How should the optional interface of 6ES7414-3EM07-0AB0 be planned?
Confirm whether the project uses the IF 964-DP slot, then match the interface module, PROFIBUS addressing and bus termination.
What network checks are needed before installing 6ES7414-3EM07-0AB0?
Record the MPI/DP parameters, PROFINET device name, IP settings, rack slot and existing communication connections.
Can 6ES7414-3EM07-0AB0 replace another S7-400 CPU without project changes?
Do not assume a direct swap; compare memory demand, interfaces, firmware, option slot use and the configured hardware catalog entry.
How is the program transferred when replacing 6ES7414-3EM07-0AB0?
Use the validated STEP 7 project and the specified memory-card method, then perform a controlled startup while monitoring diagnostic buffers.
What should engineers verify after commissioning 6ES7414-3EM07-0AB0?
Confirm all IO stations are reachable, cyclic communication is stable, time and startup behavior are correct, and no diagnostic events remain.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7414-3EM07-0AB0
- Match the complete 6ES7414-3EM07-0AB0 article number without shortening the suffix.
- Confirm compatibility with the installed SIMATIC S7-400 product range.
- Verify 4 MB work memory, divided into 2 MB code and 2 MB data memory.
- Confirm MPI/DP at 12 Mbit/s, Ethernet/PROFINET and one IF964-DP plug-in interface.