Siemens SIMATIC S7-300 6ES7355-2CH00-0AE0 FM 355-2 C
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC S7-300
6ES7355-2CH00-0AE0 FM 355-2 C Temperature Controller
Siemens 6ES7355-2CH00-0AE0 is the FM 355-2 C four-channel temperature-control function module for SIMATIC S7-300 and ET 200M, providing PID control, self-optimization and four analog controller outputs.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7355-2CH00-0AE0 |
| Product Type | Four-channel temperature-control function module |
| Core Function | Runs four independent PID control loops with analog outputs |
| Application or Compatible Series | SIMATIC S7-300 and ET 200M automation systems |
Controller Type
Use the continuous-output C version when the application requires analog controller outputs.
Loop Engineering
Match all four sensor inputs, setpoints and actuator outputs to the installed temperature-control project.
Commissioning Data
Preserve PID parameters, operating modes and cascade or ratio relationships before replacement.
Product Overview
Siemens 6ES7355-2CH00-0AE0 is the FM 355-2 C four-channel temperature-control function module for SIMATIC S7-300 and ET 200M, providing PID control, self-optimization and four analog controller outputs.
Four temperature-control loops can run independently with separate process inputs and analog outputs. Integrated self-optimization supports commissioning of PID parameters for the connected thermal process. Fixed-setpoint, cascade, ratio, mixing and split-range heating or cooling arrangements are supported.
Key Functions
Four Independent Control Channels
Four temperature-control loops can run independently with separate process inputs and analog outputs.
PID Self-Optimization
Integrated self-optimization supports commissioning of PID parameters for the connected thermal process.
Flexible Control Structures
Fixed-setpoint, cascade, ratio, mixing and split-range heating or cooling arrangements are supported.
Official Specifications
| Controller Channels | 4 independent channels |
|---|---|
| Analog Inputs | 4 |
| Digital Inputs | 8 |
| Analog Outputs | 4 |
| Reference-Junction Input | 1 input for Pt100 or thermocouple compensation |
| Analog Output Range | Plus or minus 10 V |
| Load Voltage | 24 V DC |
| Permitted Load-Voltage Range | 20.4 to 28.8 V DC |
| Reverse-Polarity Protection | Provided |
| Backplane-Bus Current | 50 mA typical; 75 mA maximum |
| L+ Current Consumption | 260 mA typical; 310 mA maximum |
| Power Loss | 6.5 W typical |
| Analog Measurement Method | Integrating conversion |
| Analog Resolution | 14 bit |
| Analog Conversion Time | 100 ms |
| Resistive-Load Settling Time | 0.1 ms |
| Capacitive-Load Settling Time | 3.3 ms |
| Inductive-Load Settling Time | 0.5 ms |
| Dimensions | 80 x 125 x 120 mm |
| Approximate Weight | 470 g |
Frequently Asked Questions
Can 6ES7355-2CH00-0AE0 control four temperature zones independently?
Yes, four independent controller channels can be configured with separate inputs, setpoints and analog outputs.
Which actuator signal does 6ES7355-2CH00-0AE0 provide?
The continuous-output version supplies four analog outputs with a range of plus or minus 10 volts.
Does 6ES7355-2CH00-0AE0 support PID tuning during commissioning?
Yes, integrated self-optimization can determine suitable controller parameters for the connected thermal process.
Can 6ES7355-2CH00-0AE0 be installed in an ET 200M station?
Yes, it is designed for use in SIMATIC S7-300 racks and distributed ET 200M stations.
Which control structures are available with 6ES7355-2CH00-0AE0?
It supports fixed-setpoint, cascade, ratio, mixing and split-range heating or cooling arrangements.
What should engineers back up before replacing 6ES7355-2CH00-0AE0?
Save the channel parameters, sensor selections, setpoints, PID values, operating modes and output assignments.
How should field wiring be checked for 6ES7355-2CH00-0AE0?
Verify the four analog inputs, eight digital inputs, reference-junction connection and four analog outputs against the existing project.
Compatibility & Ordering Notes
Compatibility Checklist
- Confirm installation in a supported SIMATIC S7-300 or ET 200M station.
- Match the continuous analog-output version to the connected actuators and project configuration.
- Back up every channel parameter and control relationship before removing the installed module.