EN
Siemens SIMATIC S7-300 CPU 317T-2 DP 6ES7317-6TK13-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMATIC S7-300 Technology - Technology programmable logic controller CPU
6ES7317-6TK13-0AB0 SIMATIC S7-300 CPU 317T-2 DP
Siemens specifies a CPU 317T-2 DP for PLC and technology tasks with integrated technology I/O and a dedicated drive-oriented DP interface.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7317-6TK13-0AB0 |
| Product Type | Technology programmable logic controller CPU |
| Core Function | PLC and motion-technology processing with dual PROFIBUS connectivity |
| Application or Compatible Series | SIMATIC S7-300 technology and drive-control systems |
Product Overview
Siemens specifies a CPU 317T-2 DP for PLC and technology tasks with integrated technology I/O and a dedicated drive-oriented DP interface.
Official Siemens documentation identifies the product for SIMATIC S7-300 technology and drive-control systems. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
PLC and Technology Tasks
Standard control and integrated technology functions run in one CPU.
Drive Communication
The second DP interface is intended for drive-related communication.
Integrated Technology I/O
A 40-pole front connector supports the documented onboard technology signals.
Official Specifications
| Hardware Functional Status | 01 |
|---|---|
| Firmware Versions | CPU V2.7; integrated technology V4.1.5 |
| Engineering Software | STEP 7 V5.4 SP5 with S7-Technology V4.2 or higher |
| Supply Range | 20.4 to 28.8 V DC |
| Typical Power Loss | 6 W |
| Work Memory | 1,024 KB |
| Memory Card Requirement | Micro Memory Card, minimum 8 MB |
| Bit / Word Operation Time | 0.05 µs / 0.2 µs |
| Interfaces | 2 x integrated RS485 |
| Maximum Interface Rate | 12 Mbit/s |
| Integrated Digital Inputs | 4 |
| Integrated Digital Outputs | 8 |
| Front Connector | 1 x 40-pole |
| Protection Rating | IP20 |
| Dimensions | 160 x 125 x 130 mm |
| Approximate Weight | 750 g |
Frequently Asked Questions
Which DC supply window should be checked before powering 6ES7317-6TK13-0AB0?
The incoming supply should remain between 20.4 and 28.8 V DC.
What engineering environment is needed to configure 6ES7317-6TK13-0AB0?
Use STEP 7 V5.4 SP5 together with S7-Technology V4.2 or a later supported release.
What memory card capacity is required for 6ES7317-6TK13-0AB0?
A Micro Memory Card with at least 8 MB is required.
How many integrated serial fieldbus interfaces are available on 6ES7317-6TK13-0AB0?
Two integrated RS485 interfaces are available, with transfer rates up to 12 Mbit/s.
Which onboard technology signals can be wired to 6ES7317-6TK13-0AB0?
The CPU provides four integrated digital inputs and eight integrated digital outputs.
What enclosure protection should cabinet designers allow for with 6ES7317-6TK13-0AB0?
The module is rated IP20 and therefore requires installation in a suitable control enclosure.
What physical clearance is needed for replacing 6ES7317-6TK13-0AB0?
Allow for a module measuring 160 x 125 x 130 mm and weighing approximately 750 g.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7317-6TK13-0AB0
- Match SIMATIC S7-300 CPU 317T-2 DP and the full article number character by character.
- Verify firmware versions: CPU V2.7; integrated technology V4.1.5.
- Confirm work memory: 1,024 KB.
- Preserve the approved settings and connection records used in SIMATIC S7-300 technology and drive-control systems.
