EN
Siemens SIMATIC S7-300 CPU 313C-2 PtP Compact CPU 6ES7313-6BG04-0AB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMATIC S7-300
6ES7313-6BG04-0AB0 SIMATIC S7-300 CPU 313C-2 PtP Compact CPU
The CPU 313C-2 PtP combines 128 KB work memory, sixteen digital inputs, sixteen digital outputs, three 30 kHz counters, MPI and an integrated RS485 interface.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7313-6BG04-0AB0 |
| Product Type | compact programmable logic controller CPU |
| Core Function | Runs S7-300 control logic with integrated digital I/O, counters and point-to-point communication |
| Application or Compatible Series | SIMATIC S7-300 machines requiring onboard I/O and an RS485 serial interface |
Exact Identification
Match 6ES7313-6BG04-0AB0 character by character and confirm the complete SIMATIC S7-300 CPU 313C-2 PtP Compact CPU designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The CPU 313C-2 PtP combines 128 KB work memory, sixteen digital inputs, sixteen digital outputs, three 30 kHz counters, MPI and an integrated RS485 interface.
Sixteen digital inputs and sixteen digital outputs reduce the need for separate basic I/O modules. Three integrated counters operate at frequencies up to 30 kHz for supported motion and measurement tasks. An integrated RS485 interface supports the configured point-to-point application alongside MPI networking.
Key Functions
Integrated Compact I/O
Sixteen digital inputs and sixteen digital outputs reduce the need for separate basic I/O modules.
High-Speed Counting
Three integrated counters operate at frequencies up to 30 kHz for supported motion and measurement tasks.
Serial Point-to-Point Communication
An integrated RS485 interface supports the configured point-to-point application alongside MPI networking.
Official Specifications
| Hardware Functional Status | 01 |
|---|---|
| Firmware Version | V3.3 |
| Rated Supply Voltage | 24 V DC |
| Permissible Supply Range | 19.2 to 28.8 V DC |
| Rated Current Consumption | 580 mA |
| Typical No-Load Current | 110 mA |
| Work Memory | 128 KB |
| Digital Inputs | 16 |
| Digital Outputs | 16 |
| High-Speed Counters | 3 |
| Maximum Counter Frequency | 30 kHz |
| Primary Interface | MPI |
| Integrated Serial Interface | RS485 |
| Front Connector | 1 x 40-pole |
| Load Memory | Micro Memory Card required |
| Engineering Baseline | STEP 7 V5.5 SP1 or supported earlier release with HSP 204 |
| Approximate Net Weight | 0.543 kg |
Frequently Asked Questions
How much integrated I/O is available on 6ES7313-6BG04-0AB0?
The compact CPU provides sixteen digital inputs and sixteen digital outputs.
What counting performance does 6ES7313-6BG04-0AB0 provide?
Three integrated high-speed counters can operate at up to 30 kHz.
Which serial connection is built into 6ES7313-6BG04-0AB0?
An RS485 interface is integrated for the configured point-to-point communication task.
Does 6ES7313-6BG04-0AB0 require a memory card?
Yes; a SIMATIC Micro Memory Card is required for load memory.
What supply range is permitted for 6ES7313-6BG04-0AB0?
Provide 24 V DC within a range of 19.2 to 28.8 V DC.
Which engineering setup recognizes 6ES7313-6BG04-0AB0?
Use STEP 7 V5.5 SP1 or a supported earlier release with hardware support package 204.
What must be recorded before replacing 6ES7313-6BG04-0AB0?
Save the program, hardware configuration, Micro Memory Card contents, MPI address, serial settings and onboard I/O assignments.
Compatibility & Ordering Notes
Compatibility Checklist
- Use a compatible SIMATIC S7-300 rack, power supply and 40-pole front connector.
- Keep the STEP 7 hardware catalog entry and Micro Memory Card aligned with the CPU firmware.
- Back up the control program, serial parameters and integrated I/O configuration before exchange.
