Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7288 0ed10 0aa0 simatic s7 200 smart pm207 24 v dc 5 a power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7288-0ED10-0AA0 SIMATIC S7-200 SMART PM207 24 V DC 5 A Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC S7-200 SMART PM207

6ES7288-0ED10-0AA0 SIMATIC S7-200 SMART PM207 24 V DC 5 A Power Supply

A 120 W PM207 supply with wide-range AC input, adjustable DC output and a parallel-operation provision for two units.

At a Glance

Brand Siemens
Model 6ES7288-0ED10-0AA0
Product Type Regulated control power supply
Core Function Providing isolated DC power
Application S7-200 SMART and compatible control loads

Wide-range source

The input accepts 100–240 V nominal AC or 88–370 V DC.

Output setting

The potentiometer adjusts the output between 22.8 and 26.4 V DC.

Cabinet installation

DIN-rail and wall mounting are supported, with required spacing on every side.

Product Overview

6ES7288-0ED10-0AA0 supplies an isolated, stabilized 24 V DC control circuit at a nominal 5 A. The PM207 is designed for SIMATIC S7-200 SMART power distribution and other loads within its electrical ratings.

A green 24 V OK LED indicates normal operation, while constant-current protection limits an output short circuit. Two supplies may be connected in parallel for increased power, subject to the parallel-operation arrangement.

Ordering focus: Budget the load, high-temperature derating and mandatory installation spacing before choosing the 5 A PM207.
Key Functions

Supply the DC control circuit

The rated 24 V, 5 A output delivers a typical 120 W of active power.

Adapt the output voltage

The output potentiometer covers 22.8–26.4 V DC.

Increase available power with a pair

The specified parallel-operation provision permits two units for increased power.

Official Specifications
Nominal AC input 1-phase, 100–240 V AC
Permitted input ranges 85–264 V AC; 88–370 V DC
Input-frequency range 47–63 Hz
Rated DC output 24 V, 5 A
Output adjustment range 22.8–26.4 V DC
Typical active output power 120 W
Overall output-voltage tolerance 0.5%
Output ripple and peaks 25 mV typical; 50 mV maximum
Minimum mains buffering 20 ms at 170 V AC and rated output current
Typical efficiency 89%
Typical power loss at rated output 15 W
Maximum inrush current 30 A at 25 °C
Overvoltage protection Below 28.8 V
Current-limit response 6–7 A; 6.5 A typical
Output protection characteristic Constant current; short-circuit proof
Parallel-operation capacity 2 units for increased power
Operating temperature −25 to +70 °C; natural convection
High-temperature current derating 3.5%/K from +55 to +70 °C
Enclosure dimensions 60 × 100 × 81 mm (W × H × D)
Net weight 0.54 kg
Frequently Asked Questions

Can I connect two 6ES7288-0ED10-0AA0 units in parallel for more output power?

The supply permits two units in the specified parallel arrangement for increased power.

How much free space should I leave around 6ES7288-0ED10-0AA0?

Provide at least 20 mm clearance above, below, left and right of the supply.

Which mounting arrangements are supported by 6ES7288-0ED10-0AA0?

The supply snaps onto an EN 60715 35 mm DIN rail and also supports wall mounting.

Can I operate 6ES7288-0ED10-0AA0 at its full 5 A rating above 55 °C?

The output requires 3.5% current derating per kelvin from 55 to 70 °C.

What feeder protection is recommended for 6ES7288-0ED10-0AA0?

A 10 A miniature circuit breaker with characteristic C is recommended.

How far can I trim the output voltage of 6ES7288-0ED10-0AA0?

The output potentiometer permits adjustment from 22.8 to 26.4 V DC.

How does 6ES7288-0ED10-0AA0 limit an output short circuit?

The supply uses a constant-current characteristic with a 6–7 A response range and a typical value of 6.5 A.

Compatibility & Ordering Notes
Before ordering 6ES7288-0ED10-0AA0: Select the 5 A PM207 for the actual DC load, input supply and installation clearances, with derating above 55 °C.

Compatibility Checklist for 6ES7288-0ED10-0AA0

  • Provide the specified nominal AC source or an input within the permitted DC range.
  • Reserve 20 mm clearance on all four sides and do not line up housings without spacing.
  • Use protective earth and the recommended 10 A characteristic-C feeder protection.
  • Observe the two-unit limit when using parallel operation for increased power.
Hot Selling Models
ADVU-25-10-AP-AN-"M6"K51 572037
GM701S GIMC-4030-US2OSSD
3LD2504-3VK53
H5-IES-SC-24DC/500AC-2 2900414
KB-1 031000003
FFR-A520-16A-SF100
6ES5095-8MB02
V15-GS-10M-T-03M-PUR-A-V1-C1
MGPL16-80
3RB3123-4VB0
XS7T4PC440LD
LKHA-16UP-M12
P-E16/1 42​​621600
67FFP43E
BNS25011ZG

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.