Siemens 6ES7195-7HD10-0XA0 ET 200M BM IM/IM Redundant Interface Bus Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the IM 153-2B interface generation assigned to this bus module.
- Provide the active-bus mounting rail.
- Select downstream bus bases for the actual 40 mm or 80 mm module widths.
- Include the required backplane and bus-module covers.
6ES7195-7HD10-0XA0 ET 200M BM IM/IM Redundant Interface Bus Module
An active BM IM/IM base for a redundant interface pair, supporting ET 200M module replacement during RUN.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7195-7HD10-0XA0 |
| Product Type | Active backplane bus module |
| Core Function | Maintaining the station backplane connection |
| Application | Redundant IM 153-2 stations |
Interface pair
The bus module accommodates two compatible IM 153-2 interfaces.
Active backplane
Other modules remain reachable when an I/O position is vacant.
Dedicated rail
Installation uses the mounting rail for active bus modules.
Product Overview
6ES7195-7HD10-0XA0 forms the interface-side backplane of an ET 200M station using compatible IM 153-2 modules. It accommodates the redundant interface pair and supports the active-bus arrangement required for module removal and insertion during RUN.
The base is a backplane component rather than a power supply or an I/O signal module. A complete station also needs the correct active-bus mounting rail and the bus modules selected for the widths of the downstream S7-300 modules.
Key Functions
Maintain backplane continuity
The active bus keeps other modules reachable when a station module is removed.
Provide the interface-side base
The BM IM/IM accommodates the two IM 153-2 modules of a redundant ET 200M arrangement.
Support planned station expansion
Downstream BM 2 x 40 and BM 1 x 80 components provide the corresponding S7-300 module positions.
Official Specifications
| Interface mounting positions | 2 for the redundant IM 153-2 arrangement |
|---|---|
| Dimensions | 97 × 92 × 30 mm (W × H × D) |
| Approximate net weight | 133 g |
| Operating temperature (ET 200M system) | 0 to +60 °C with horizontal mounting; 0 to +40 °C with vertical mounting |
| Packaged storage temperature | -40 to +70 °C in the original packaging |
| Relative humidity (ET 200M system) | 10 to 95% RH, without condensation |
| Operating altitude (ET 200M system) | -1,000 to +2,000 m relative to sea level |
| Shock qualification (ET 200M system) | IEC 60068-2-27; half-sine pulses at 15 g for 11 ms; three pulses per polarity on each of three orthogonal axes |
Frequently Asked Questions
Which IM 153-2 generation can I mount on 6ES7195-7HD10-0XA0?
The BM IM/IM variant is assigned to IM 153-2Bx00 and IM 153-2Bxx1 interfaces.
Do I need a special mounting rail for 6ES7195-7HD10-0XA0?
The active-bus arrangement uses the ET 200M mounting rail designed for active bus modules.
Can a nonredundant station also use 6ES7195-7HD10-0XA0?
The standard nonredundant arrangement can use this BM IM/IM with one compatible IM 153-2.
Will an empty I/O position downstream of 6ES7195-7HD10-0XA0 interrupt all backplane communication?
The active bus allows the other modules to remain reachable when a module is missing.
Does 6ES7195-7HD10-0XA0 include the power-supply mounting position of a BM PS/IM?
The BM IM/IM holds the interface pair, while the separate BM PS/IM is the base for a power supply and interface.
How should I choose I/O bases after 6ES7195-7HD10-0XA0?
Use BM 2 x 40 for one or two 40 mm modules and BM 1 x 80 for an 80 mm module.
What space does 6ES7195-7HD10-0XA0 occupy before the I/O bus modules?
The bus module measures 97 mm wide, 92 mm high and 30 mm deep.