Siemens 6ES7195-7HB00-0XA0 SIMATIC ET 200M Active Bus Module 2x40mm
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use compatible S7-300 I/O modules in an ET 200M active-backplane station.
- Select the separate 1 × 80 mm bus module for an 80 mm-wide I/O module.
- Mount on the rail designed for module change during operation.
- Close all unused I/O positions with backplane-bus covers.
- Install the bus-module cover at the end of the active backplane.
- Use the separate PS/IM or IM/IM bus module where the station requires it.
6ES7195-7HB00-0XA0 SIMATIC ET 200M Active Bus Module 2x40mm
An active ET 200M bus module for one or two 40 mm-wide I/O modules, providing the backplane arrangement used for module changes during operation.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7195-7HB00-0XA0 |
| Product Type | Active I/O bus module |
| Core Function | Maintaining the station backplane during I/O-module exchange |
| Application | ET 200M stations with compatible S7-300 I/O modules |
Two I/O positions
The carrier accepts one or two 40 mm-wide S7-300 modules.
Installed footprint
Its installed width is 80 mm, compared with 97 mm before assembly.
Covered backplane
Unoccupied positions and the last bus module require their corresponding covers.
Product Overview
6ES7195-7HB00-0XA0 provides the active-backplane positions for compatible 40 mm-wide I/O modules in an ET 200M station.
The bus modules are fitted on the rail intended for module change during operation, and the completed assembly uses backplane covers at unused positions and an end cover at the last bus module.
Key Functions
Carry the selected I/O modules
One or two compatible 40 mm-wide S7-300 I/O modules can be fitted to this bus module.
Build the active station backplane
The bus module forms part of the ET 200M active-backplane assembly used for I/O-module changes during operation.
Close unused backplane positions
Backplane-bus covers protect unoccupied slots, and a bus-module cover closes the last active bus module.
Official Specifications
| I/O Positions | 2 positions; one or two modules may be fitted |
|---|---|
| Supported Width per I/O Module | 40 mm |
| Dimensions and Installed Width | 97 × 92 × 30 mm; installed width 80 mm |
| Approximate Weight | 140 g |
Frequently Asked Questions
Can I install a single 40 mm-wide I/O module on 6ES7195-7HB00-0XA0?
The bus module supports either one or two compatible 40 mm-wide S7-300 modules.
Can 6ES7195-7HB00-0XA0 carry one 80 mm-wide I/O module?
The specified bus module for one 80 mm-wide I/O module is 6ES7195-7HC00-0XA0.
Which rail should I use when installing 6ES7195-7HB00-0XA0?
Use the ET 200M rail intended for module change during operation because it accommodates the active bus modules.
What should I fit to an unused position on 6ES7195-7HB00-0XA0?
Close an unoccupied position with the corresponding backplane-bus cover.
How do I close the station when 6ES7195-7HB00-0XA0 is the last bus module?
Fit the bus-module cover to the end of the last active bus module.
Is 6ES7195-7HB00-0XA0 the bus module for the power supply and interface module?
The separate BM PS/IM module for that purpose is 6ES7195-7HA00-0XA0.
Which width should I allow for 6ES7195-7HB00-0XA0 in the assembled station?
The bus module occupies 80 mm when installed.