Siemens 6ES7194-4BD00-0AA0 SIMATIC ET 200pro CM PM-E 7/8 Connection Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Mount the PM-E power and bus modules before fitting the connection module.
- Wire X01 with 2M at pin 1, FE at pin 3 and 2L+ at pin 5.
- Leave unused pins 2 and 4 unassigned.
- Tighten the module screws and connector coupling to 1.5 N·m.
- Switch off 2L+ before unplugging.
- Seal unused circular sockets with the matching cap.
6ES7194-4BD00-0AA0 SIMATIC ET 200pro CM PM-E 7/8 Connection Module
A single-7/8-inch connection module for feeding the 2L+ load supply to an ET 200pro PM-E assembly.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7194-4BD00-0AA0 |
| Product Type | Power-module connection accessory |
| Core Function | Introduces the load supply into a station segment |
| Application | ET 200pro PM-E load groups |
Circular power connector
Uses the 7/8-inch X01 connection.
Load-group supply
Feeds the 2L+ load-voltage circuit.
Matched PM-E assembly
Fits the corresponding ET 200pro power module.
Product Overview
6ES7194-4BD00-0AA0 provides the circular-connector field interface for an ET 200pro PM-E power module.
The connection module feeds the load supply through X01, with a defined 2L+, 2M and functional-earth pinout and mechanical fastening to the power-module assembly.
Key Functions
2L+ group power feed
The module connects the load-voltage supply to the PM-E assembly through one circular input.
Defined field pinout
The X01 assignment places 2M on pin 1, FE on pin 3 and 2L+ on pin 5.
Sealed circular connection
Correctly engaged and tightened connectors, or a cap on an unused socket, support the assembly’s specified enclosure protection.
Official Specifications
| Rated load supply | 24 V DC |
|---|---|
| Maximum 2L+ feed current | 8 A |
| Circular interface | 1 × 7/8-inch X01, 5-pin |
| X01 pin assignment | 1: 2M; 2 and 4: not assigned; 3: FE; 5: 2L+ |
| Module fastening torque | 1.5 N·m for both mounting screws |
| Circular connector tightening torque | 1.5 N·m |
| Dimensions (W × H × D) | 45 × 130 × 48 mm |
| Approximate weight | 120 g |
Frequently Asked Questions
Which load circuit is supplied through 6ES7194-4BD00-0AA0?
The connection module feeds the ET 200pro load-voltage circuit 2L+ through connector X01.
Can I use direct bare-wire terminals on 6ES7194-4BD00-0AA0?
This variant uses a 7/8-inch circular connector, with a suitable cable connector required for field wiring.
Which pin on 6ES7194-4BD00-0AA0 carries the positive load supply?
Pin 5 carries 2L+, pin 1 carries 2M and pin 3 is functional earth.
What cable do I need if I assemble the connection for 6ES7194-4BD00-0AA0?
Use a suitable 7/8-inch connector and three-wire cable, or select a prefabricated cable of the required length.
How tightly should I mount 6ES7194-4BD00-0AA0 to the power module?
Tighten the two module screws evenly to 1.5 N·m.
Can I remove the 7/8-inch connector from 6ES7194-4BD00-0AA0 while operating?
Switch off the load supply 2L+ before removing the connector.
How should I protect an unused circular socket on 6ES7194-4BD00-0AA0?
Close an unused 7/8-inch socket with the appropriate cap to maintain the required IP65, IP66 or IP67 assembly protection.