Siemens 6ES7193-4CB10-0AA0 SIMATIC ET 200S TM-E15C23-01 Terminal Module

Overview

SIEMENS SIMATIC ET 200S

6ES7193-4CB10-0AA0 SIMATIC ET 200S TM-E15C23-01 Terminal Module

A spring-terminal base with six numbered connections and a continuous AUX1 bus without local auxiliary terminals.

At a Glance

Brand	Siemens
Model	6ES7193-4CB10-0AA0
Product Type	Electronic module terminal base
Core Function	Compact field-wire termination
Application	ET 200S electronic modules

Six field connections

Terminals 1–3 and 5–7 carry the signals assigned by the electronic module.

AUX1 passes through

The auxiliary potential remains continuous without a local AUX1 landing point.

Compact terminal height

The 120 mm housing suits the reduced 2 × 3 terminal pattern.

Product Overview

6ES7193-4CB10-0AA0 is the TM-E15C23-01 spring-terminal base for electronic modules in an ET 200S station.

Its reduced terminal pattern provides the six numbered positions needed by suitable modules while retaining the auxiliary bus internally through the station.

Ordering focus: Use this 2 × 3 base only where the circuit does not need numbered terminals 4 and 8 or local AUX1 access.

Key Functions

Terminate the six assigned signals

The electronic module determines the function of terminals 1, 2, 3, 5, 6 and 7.

Maintain auxiliary continuity

The internal AUX1 bus connects to the preceding potential group without being exposed at field terminals.

Prewire a compact spring base

Field conductors can remain on the terminal base when the electronic module is exchanged.

Official Specifications

Terminal arrangement	2 × 3 connections
Connection technology	Spring-loaded terminals
Numbered terminal positions	1–3 and 5–7
Auxiliary bus arrangement	Continuous AUX1 without field-terminal access
Bare solid and flexible conductor range	0.14–2.5 mm²
Flexible conductor range with ferrule	0.14–1.5 mm²
Wire stripping length	11 mm
Conductors per terminal	1; alternatively 2 totaling up to 1.5 mm² in a shared ferrule
Maximum wire insulation diameter	3.1 mm at 1.5 mm²; 3.8 mm at 2.5 mm²
Terminal release tool	Screwdriver with 3 mm blade
Dimensions (W × H × D)	15 × 120 × 43 mm
Approximate module weight	55 g

Official source:Siemens terminal-module manual · ET 200S wiring instructions · 4DO ST compatible bases

Frequently Asked Questions

Can I connect a protective-conductor wire to an AUX1 terminal on 6ES7193-4CB10-0AA0?

No, this base carries AUX1 internally but does not provide local terminal access to that bus.

Does 6ES7193-4CB10-0AA0 include numbered terminals 4 and 8?

No, its numbered field connections are limited to 1–3 and 5–7.

Can 6ES7193-4CB10-0AA0 serve as a terminal base for 6ES7132-4BD02-0AA0?

Yes, TM-E15C23-01 is a compatible spring-terminal base for that four-channel standard output module.

How tall is 6ES7193-4CB10-0AA0 compared with a 132 mm TM-E base?

Its housing is 120 mm high, which is 12 mm shorter than a 132 mm base.

Must I add ferrules to every conductor connected to 6ES7193-4CB10-0AA0?

No, the terminal also accepts bare solid and flexible conductors within the specified 0.14–2.5 mm² range.

Can the AUX1 path in 6ES7193-4CB10-0AA0 start a separately isolated auxiliary group?

No, the AUX1 path remains continuous to the potential group on the left.

How are the field signals on 6ES7193-4CB10-0AA0 assigned to the terminals?

The inserted electronic module determines the signal function of each numbered connection.

Compatibility & Ordering Notes

Before ordering 6ES7193-4CB10-0AA0: Select TM-E15C23-01 where six numbered terminals are sufficient and no local AUX1 connection is needed, then verify the electronic-module pin assignment.

Compatibility Checklist for 6ES7193-4CB10-0AA0

• Use terminals 1–3 and 5–7 according to the electronic module.
• Provide auxiliary landing points elsewhere when required.
• Retain the intended continuous AUX1 potential.
• Prepare spring-terminal conductors to the 11 mm stripping length.

Hot Selling Models