Siemens 6ES7153-2BA00-0XB0 SIMATIC ET 200M IM 153-2 High Feature Interface
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Limit the station to eight S7-300 modules.
- Keep the 5 V backplane load within 1 A.
- Select an address within 1–125 and a compatible PROFIBUS configuration.
- Use the required GSD and engineering arrangement for the installed IM generation.
- Provide 24 V DC and operate within 0–60 °C.
6ES7153-2BA00-0XB0 SIMATIC ET 200M IM 153-2 High Feature Interface
A PROFIBUS DP IM 153-2 High Feature interface for up to eight S7-300 modules, with redundancy, time stamping and isochronous-mode capability.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7153-2BA00-0XB0 |
| Product Type | IM 153-2 High Feature interface module |
| Core Function | Linking modular I/O to a PROFIBUS DP master |
| Application | ET 200M stations with S7-300 modules |
Modular station link
Connects up to eight S7-300 modules in an ET 200M station.
Event time stamping
Up to 128 digital inputs can be time-stamped with 1 ms time resolution.
PROFIBUS connectivity
RS485 communication uses a 9-pin D-sub socket at up to 12 Mbit/s.
Product Overview
6ES7153-2BA00-0XB0 connects an ET 200M station to PROFIBUS DP and supports up to eight S7-300 modules in the local I/O assembly.
The High Feature interface supports redundancy, time stamping and isochronous operation, with separate input and output address capacity and message buffers for recorded input events.
Key Functions
Connect the modular station
The RS485 PROFIBUS DP interface supports automatic transmission-rate detection up to 12 Mbit/s.
Record input events
The time-stamping arrangement supports up to 128 digital inputs, 1 ms resolution and 15 message buffers with 20 messages each.
Support coordinated fieldbus operation
SYNC, FREEZE and sender-side direct data exchange are available for the supported station configuration.
Official Specifications
| Rated Supply | 24 V DC |
|---|---|
| Maximum Supply Current | 550 mA at 24 V DC |
| Typical Inrush Current and I²t | 2.5 A; 0.1 A²·s |
| Backplane Output | 5 V DC, maximum 1 A |
| Typical Power Dissipation | 5 W |
| Station Module Capacity | Up to 8 S7-300 modules |
| Input and Output Address Capacity | 128 bytes each |
| PROFIBUS Interface | RS485, 9-pin D-sub socket; up to 12 Mbit/s |
| PROFIBUS Address Range | 1–125 |
| Time-Stamping Capacity | Up to 128 digital inputs |
| Time Resolution | 1 ms |
| Event Message Buffers | 15 buffers with 20 messages per buffer |
| Message-Buffer Transmission Interval | 1000 ms when a message is present |
| Signal-Edge Time Stamping | Rising and falling edges |
| Isolation Test Voltage | 500 V |
| Enclosure Protection | IP20 |
| Operating Ambient Temperature | 0–60 °C |
| Maximum Installation Altitude | 3000 m |
| Dimensions (W × H × D) | 40 × 125 × 117 mm |
| Approximate Weight | 360 g |
Frequently Asked Questions
How many S7-300 modules can I connect behind 6ES7153-2BA00-0XB0?
The interface supports up to eight S7-300 modules.
Can 6ES7153-2BA00-0XB0 find the PROFIBUS transmission rate automatically?
The interface supports automatic transmission-rate detection.
How many event messages fit in the buffers of 6ES7153-2BA00-0XB0?
The interface has 15 message buffers with 20 messages in each buffer.
Can 6ES7153-2BA00-0XB0 time-stamp both an arriving and a disappearing signal?
Rising and falling signal edges can both be time-stamped.
What current does 6ES7153-2BA00-0XB0 provide to the backplane?
The backplane output provides 5 V DC at up to 1 A.
Which engineering options can configure 6ES7153-2BA00-0XB0?
Configuration is possible with STEP 7, COM PROFIBUS or suitable third-party tools using a GSD file.
Does 6ES7153-2BA00-0XB0 support direct data exchange between PROFIBUS slaves?
The interface supports direct data exchange as a sender.