Siemens 6ES7151-1CA00-1BL0 ET 200S IM151-1 COMPACT 32 DI Electronics Block
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use the 32 DI version where onboard outputs are unnecessary.
- Limit expansion to 12 additional modules and exclude fail-safe modules.
- Keep the station within 100 input bytes and 100 output bytes.
- Match the terminal hardware and 24 V DC sensor wiring to the compact station.
6ES7151-1CA00-1BL0 ET 200S IM151-1 COMPACT 32 DI Electronics Block
The IM151-1 COMPACT electronics block combines 32 digital inputs with a PROFIBUS interface and supports up to 12 additional ET 200S modules.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7151-1CA00-1BL0 |
| Product Type | Compact electronics block |
| Core Function | PROFIBUS distributed input acquisition |
| Application | ET 200S distributed I/O stations |
32 onboard inputs
The electronics block acquires 24 V DC digital signals.
Expandable station
Up to 12 additional ET 200S modules can be connected.
Input-only block
The onboard configuration contains no digital outputs.
Product Overview
6ES7151-1CA00-1BL0 combines the ET 200S COMPACT PROFIBUS interface with 32 onboard digital inputs in an electronics block. The input circuit has a typical delay of 3 ms for both switching directions.
The station can be extended with up to 12 ET 200S modules, excluding fail-safe modules, and provides 100 bytes each of input and output address space for its configuration.
Key Functions
Discrete signal acquisition
Thirty-two inputs detect 24 V DC signals, with logic 1 recognized from 13 to 30 V and logic 0 from −30 to +5 V.
PROFIBUS station coupling
The RS485 interface connects the compact I/O station to PROFIBUS DP and supports direct slave-to-slave data exchange.
Local station expansion
Additional ET 200S modules extend the station within the 12-module limit, while onboard BF, SF and ON LEDs support fault and supply checks.
Official Specifications
| Digital input count | 32 |
|---|---|
| Rated supply voltage | 24 V DC at 1L+; reverse-polarity protection |
| Maximum supply current | 100 mA |
| Typical power loss | 3 W |
| Station address space | 100 input bytes and 100 output bytes |
| Input signal thresholds | Logic 0: −30 to +5 V; logic 1: 13 to 30 V |
| Input current at logic 1 | Typically 4 mA at 24 V; minimum 2 mA |
| Input delay in either direction | 1.2 to 4.8 ms; typically 3 ms |
| Maximum unshielded input cable | 1000 m |
| Isolation test voltage | 500 V DC |
| Status LEDs | BF red, SF red and ON green |
| Dimensions (W × H × D) | 120 × 81 × 58 mm |
Frequently Asked Questions
Can 6ES7151-1CA00-1BL0 switch actuators directly from its onboard channels?
The electronics block has 32 digital inputs and no onboard digital outputs.
How many extra ET 200S modules can I add to 6ES7151-1CA00-1BL0?
The compact station supports up to 12 additional ET 200S modules.
Can I add fail-safe I/O modules behind 6ES7151-1CA00-1BL0?
Fail-safe modules are excluded from the permitted station expansion.
Will a 10 V sensor signal register as ON at 6ES7151-1CA00-1BL0?
A logic 1 requires 13 to 30 V, so 10 V is below the specified ON threshold.
How much input filtering does 6ES7151-1CA00-1BL0 apply to a switching signal?
The input delay is typically 3 ms and ranges from 1.2 to 4.8 ms in either switching direction.
Can the expanded station on 6ES7151-1CA00-1BL0 include output process data?
The station offers 100 output bytes as well as 100 input bytes despite having no onboard digital outputs.
Which indicators help me distinguish a bus fault from a supply check on 6ES7151-1CA00-1BL0?
The electronics block provides a red BF indicator for the bus, a red SF group-fault indicator and a green ON supply indicator.