Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7147 6bg00 0ab0 simatic et 200eco pn 8dio field i o block-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7147-6BG00-0AB0 SIMATIC ET 200eco PN 8DIO Field I/O Block

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC ET 200eco PN

6ES7147-6BG00-0AB0 SIMATIC ET 200eco PN 8DIO Field I/O Block

IP65/67 field block with eight individually configurable digital input/output channels, M12 connections and a two-port PROFINET switch.

At a Glance

Brand Siemens
Model 6ES7147-6BG00-0AB0
Product Type Configurable digital field I/O block
Core Function Distributed sensor and actuator connection
Application Cabinet-free PROFINET IO installations

Channel-by-channel I/O selection

Each of the eight DIO channels can be parameterized as a digital input or output, with input operation as the default.

Protected field connections

IP65/67 construction and 4/5-pin M12 connectors support installation close to sensors and actuators.

Network and load diagnostics

PROFINET monitoring covers supply voltage, sensor and actuator wire breaks, short circuits and group errors.

Product Overview

6ES7147-6BG00-0AB0 connects sensors and actuators directly in the field through eight configurable digital I/O channels and sealed M12 connectors.

Each channel can be assigned as an input or output, allowing the station configuration to match the machine wiring while PROFINET diagnostics report supply, wire-break and short-circuit faults.

Ordering focus: Configure the eight shared channels as the required mix of inputs and outputs, use NEC Class 2 power and stay within the 1.3 A channel and 3.9 A output-group limits.
Key Functions

Channel-by-channel I/O selection

Each of the eight DIO channels can be parameterized as a digital input or output, with input operation as the default.

Protected field connections

IP65/67 construction and 4/5-pin M12 connectors support installation close to sensors and actuators.

Network and load diagnostics

PROFINET monitoring covers supply voltage, sensor and actuator wire breaks, short circuits and group errors.

Official Specifications
Configurable channels 8 DIO channels, each selectable as input or output
Rated supply and load voltage 24 V DC; 2L+ range 20.4–28.8 V
Supply current limits 4 A maximum from 1L+ and 4 A maximum from 2L+
Typical electronics current and loss 100 mA; 6.5 W
Sensor supply output 100 mA maximum per output; electronic short-circuit protection
Input characteristic IEC 61131 Type 3
Input switching thresholds Signal 0: −3 to +5 V; signal 1: +11 to +30 V
Typical input current and delay 7 mA; 3 ms for each transition
Maximum output channel current 1.3 A
Output-group current 3.9 A maximum per group up to 60°C
Electronic short-circuit threshold 1.8 A typical
Output leakage current 1.5 mA maximum in the off state
Load switching limits 100 Hz resistive; 0.5 Hz inductive; 1 Hz lamp load
Lamp-load rating 5 W maximum
Unshielded field cable length 30 m maximum for inputs and outputs
Ethernet interface 100BASE-TX through M12 ports with integrated switch; 100 Mbit/s maximum
Network functions MRP media redundancy, IRT high flexibility and prioritized startup
Electrical separation Ethernet isolated from electronics; no channel-to-channel isolation
Protection and connectors IP65/67; 4/5-pin M12 circular connections
Dimensions and weight 60 × 175 × 49 mm (W × H × D); approximately 910 g
Frequently Asked Questions

Does 6ES7147-6BG00-0AB0 have eight inputs plus eight independent outputs?

The block has eight shared DIO channels, each individually configured as an input or an output.

How are the channels on 6ES7147-6BG00-0AB0 configured before commissioning?

Assign the required input or output function to each channel in the PROFINET configuration, with digital input as the default setting.

Can all four outputs in one group of 6ES7147-6BG00-0AB0 carry 1.3 A together?

The total current of an output group must remain within 3.9 A up to 60°C even though a single channel can carry 1.3 A.

What power-supply arrangement is required for 6ES7147-6BG00-0AB0?

Use a 24 V DC supply meeting NEC Class 2 and keep the 2L+ load voltage within 20.4–28.8 V.

How can outputs on 6ES7147-6BG00-0AB0 behave when the CPU stops?

The configured CPU-stop response can switch outputs off or retain their last value.

Can 6ES7147-6BG00-0AB0 participate in an MRP ring?

The integrated PROFINET switch supports MRP media redundancy.

Which wiring faults can 6ES7147-6BG00-0AB0 diagnose?

The block can report actuator and sensor wire breaks, short circuits, sensor-supply faults and group errors.

Compatibility & Ordering Notes
Before ordering 6ES7147-6BG00-0AB0: Configure the eight shared channels as the required mix of inputs and outputs, use NEC Class 2 power and stay within the 1.3 A channel and 3.9 A output-group limits.

Before installation

  • Use NEC Class 2 power and wire the 1L+ and 2L+ potential groups to suit the selected sensor and actuator circuits.
  • Parameterize all eight channels and the CPU-stop output response before energizing the loads.
  • Limit output loading to 1.3 A per channel and 3.9 A per group, without paralleling outputs for increased current.
  • Use correctly assembled M12 connections and keep unshielded field wiring within 30 m.
Hot Selling Models
DCY164MMS
260-02ZG-ST-L
MBC1566A
151154447 ZR 335-11Z-M20
BOS00A9 BOS 6K-PU-10C-S75-C
FSDM08D9001/S35
FEDM08P3001/S35L
41.040.038-00.00-148
TE10S/40A/480V/LGC/PLF/96/00
3RV1031-4EA15
OJ5148
53004016
ABB S201 C10 2CDS251001R0104
CSEM06
CSEF06

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.