EN
Siemens SIMATIC ET 200eco PN 6ES7145-6HD00-0AB0 4 AO U/I Analog Output Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use approved M12 connectors and sealing components to maintain the enclosure rating.
- Restore the channel ranges and substitute values from the validated PROFINET project.
- Confirm the connected voltage and current loads remain within their documented limits.
SIEMENS · SIMATIC ET 200eco PN
6ES7145-6HD00-0AB0 4 AO U/I Analog Output Module
The 6ES7145-6HD00-0AB0 ET 200eco PN device provides four analog outputs with selectable voltage and current ranges in a rugged IP65/IP67 field enclosure.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7145-6HD00-0AB0 |
| Product Type | IP67 four-channel analog output I/O device |
| Core Function | Generates four configurable voltage or current outputs directly in the field |
| Application or Compatible Series | PROFINET ET 200eco PN installations with M12 actuator connections |
Exact Identification
Match 6ES7145-6HD00-0AB0 character by character before replacement.
Interface Check
Confirm the installed supply, terminals, network and field wiring.
Project Backup
Preserve the validated configuration and application data before exchange.
Product Overview
The 6ES7145-6HD00-0AB0 ET 200eco PN device provides four analog outputs with selectable voltage and current ranges in a rugged IP65/IP67 field enclosure.
Four channels can be parameterized for standard unipolar or bipolar voltage and current ranges. M12 connections and IP65/IP67 protection support direct machine mounting. Channel diagnostics cover supply monitoring, wire break on current outputs and short circuit on voltage outputs.
Key Functions
Voltage and Current Output Modes
Four channels can be parameterized for standard unipolar or bipolar voltage and current ranges.
Rugged Field Installation
M12 connections and IP65/IP67 protection support direct machine mounting.
PROFINET Diagnostics
Channel diagnostics cover supply monitoring, wire break on current outputs and short circuit on voltage outputs.
Official Specifications
| Analog Output Channels | 4 |
|---|---|
| Rated Supply Voltage | 24 V DC |
| Typical Current Consumption | 280 mA |
| Typical Power Loss | 5.5 W |
| Voltage Output Ranges | 0 to 10 V, 1 to 5 V and ±10 V |
| Current Output Ranges | 0 to 20 mA, 4 to 20 mA and ±20 mA |
| Voltage Output Short-Circuit Current | 30 mA maximum |
| Current Output No-Load Voltage | 20 V maximum |
| Minimum Voltage-Output Load | 1 kΩ |
| Maximum Capacitive Load | 1 µF |
| Maximum Current-Output Load | 600 Ω |
| Maximum Inductive Load | 1 mH |
| Actuator Supply Outputs | 4 |
| Maximum Actuator Output Current | 1 A per channel |
| Electrical Connection | 4-pin and 5-pin M12 circular connectors |
| Protection Rating | IP65/IP67 |
| Dimensions | 60 × 175 × 49 mm |
| Approximate Weight | 930 g |
Frequently Asked Questions
Which output signals can 6ES7145-6HD00-0AB0 generate?
Configure each application for the required 0 to 10 V, 1 to 5 V, ±10 V, 0 to 20 mA, 4 to 20 mA or ±20 mA range.
Can 6ES7145-6HD00-0AB0 be mounted outside a control cabinet?
Yes, its IP65/IP67 enclosure is intended for field installation when every M12 connection is correctly sealed.
What load is permitted on a current output of 6ES7145-6HD00-0AB0?
Keep the connected load at or below 600 Ω and the inductance at or below 1 mH.
How should a voltage output from 6ES7145-6HD00-0AB0 be loaded?
Use a load of at least 1 kΩ and keep capacitive loading within 1 µF.
Which faults can 6ES7145-6HD00-0AB0 report?
The device supports supply monitoring, current-output wire-break diagnostics, voltage-output short-circuit diagnostics and group fault indication.
What should be saved before replacing 6ES7145-6HD00-0AB0?
Record all channel ranges, substitute values, PROFINET parameters and M12 pin assignments.
What should be tested after installing 6ES7145-6HD00-0AB0?
Verify every analog command value, actuator supply, diagnostic response and enclosure seal.
