Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6es7143 5bf00 0ba0 et 200al diq 4 dq 4 digital i o module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6ES7143-5BF00-0BA0 ET 200AL DIQ 4 + DQ 4 Digital I/O Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIMATIC ET 200AL

6ES7143-5BF00-0BA0 ET 200AL DIQ 4 + DQ 4 Digital I/O Module

A compact field module with four configurable DIQ channels, four fixed digital outputs and eight M8 I/O connections.

At a Glance

Brand Siemens
Model 6ES7143-5BF00-0BA0
Product Type Distributed digital I/O module
Core Function Configurable sensor inputs and load switching
Application ET 200AL field I/O stations

Four configurable channels

Each DIQ position can serve as a digital input or output, allowing up to four inputs alongside the four fixed outputs or up to eight outputs in total.

Two output load groups

Current-sourcing outputs deliver up to 0.5 A per channel with a maximum of 2 A in each four-output group.

Field diagnostics and protection

Electronic short-circuit protection, status LEDs and configurable diagnostic alarms support field commissioning and maintenance.

Product Overview

6ES7143-5BF00-0BA0 combines four channels configurable as digital input or output with four dedicated digital outputs.

The module uses 24 V DC load supplies and M8 wiring for field installation, with channel status indication, electronic output protection and configurable substitute values.

Ordering focus: Allocate each DIQ channel as an input or output, size both load groups and match the M8 field connections to the station layout.
Key Functions

Four configurable channels

Each DIQ position can serve as a digital input or output, allowing up to four inputs alongside the four fixed outputs or up to eight outputs in total.

Two output load groups

Current-sourcing outputs deliver up to 0.5 A per channel with a maximum of 2 A in each four-output group.

Field diagnostics and protection

Electronic short-circuit protection, status LEDs and configurable diagnostic alarms support field commissioning and maintenance.

Official Specifications
Channel arrangement 4 configurable DIQ channels plus 4 fixed DQ channels
Load supplies 1L+ and 2L+: 24 V DC; permitted 20.4–28.8 V DC
Input characteristic P-reading; IEC 61131 type 3
Input logic levels Logic 0: −3 to +5 V; logic 1: +11 to +30 V
Input delay 1.2–4.8 ms for either signal transition
Output channel rating Current-sourcing, 0.5 A
Maximum output-group current 2 A per group of four outputs
Output protection Electronic short-circuit protection per channel; typical response threshold 0.7 A
Sensor supply 4 outputs; maximum total sensor current 0.7 A
Maximum lamp load 5 W
Switching frequencies 100 Hz resistive; 0.5 Hz inductive; 1 Hz lamp load
Maximum unshielded I/O cable 30 m
Two-wire sensor limit Maximum quiescent current 1.5 mA
I/O connections 8 × M8, 3-pole
Supply and ET-Connection M8 4-pole power; M8 4-pin shielded ET-Connection
Typical power loss 2.5 W
Protection rating IP65/IP67
Operating temperature −30 to +55 °C
Dimensions 30 × 159 × 40 mm
Approximate weight 145 g
Frequently Asked Questions

Can I configure all eight channels of 6ES7143-5BF00-0BA0 as outputs?

Four channels are fixed outputs and the other four can be parameterized as outputs, giving a maximum of eight outputs.

How many digital inputs remain when the DIQ channels of 6ES7143-5BF00-0BA0 are used as outputs?

A DIQ channel used as an output is unavailable as an input, so the input count depends on the four DIQ assignments.

Can one output on 6ES7143-5BF00-0BA0 supply a 0.8 A actuator?

The rated output current is 0.5 A per channel, so a 0.8 A actuator exceeds that channel rating.

What current limit applies to a four-output group on 6ES7143-5BF00-0BA0?

Each group of four outputs is limited to a total current of 2 A.

Can I use two-wire proximity sensors with 6ES7143-5BF00-0BA0?

Two-wire sensors are supported when their quiescent current does not exceed 1.5 mA.

How far can I run unshielded sensor or actuator cables from 6ES7143-5BF00-0BA0?

The maximum unshielded I/O cable length is 30 m.

Which TIA Portal release can configure 6ES7143-5BF00-0BA0?

The module is configurable from STEP 7 V13 SP1 in TIA Portal.

Compatibility & Ordering Notes
Before ordering 6ES7143-5BF00-0BA0: Allocate each DIQ channel as an input or output, size both load groups and match the M8 field connections to the station layout.

Before installation

  • Assign the four DIQ channels according to the required input/output balance.
  • Keep each output at or below 0.5 A and each four-output group at or below 2 A.
  • Use the correct M8 I/O, power and shielded ET-Connection cables.
  • Use STEP 7 V13 SP1 or later in TIA Portal, or STEP 7 V5.5 SP4 Hotfix 3 or later for the supported engineering arrangement.
Hot Selling Models
Allen-Bradley 1738-EXT3
ABB BE40-30-11 FPL3319001R0114
2.10 9000-41042-0401000
1471823
BG5924.04
1471823 1471001
Bi8U-M18M-VP44X-H1141
ifm efector OS5015
DPDM-20-25-PA
M304/10-23-10
WL12-P1221
TU8001-2
ASBSV4-5
3VF1231-1DH11-0AA0
50046 9328

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.