Siemens 6ES7143-4BF50-0AA0 SIMATIC ET 200pro 4DI/4DO Digital I/O Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Order the CM IO connection face separately and use the pin assignment for this mixed module.
- Keep output loads within 0.5 A per channel and 2 A per group.
- Limit unshielded input and output cables to 30 m.
- Use pin 1 for the encoder supply from 2L+, pin 3 for 2M and pin 5 for functional earth on the listed M12 connection modules.
6ES7143-4BF50-0AA0 SIMATIC ET 200pro 4DI/4DO Digital I/O Module
Four digital inputs and four 0.5 A outputs share a 24 V DC electronic module with short-circuit diagnostics.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7143-4BF50-0AA0 |
| Product Type | Mixed digital electronic module |
| Core Function | Acquire sensors and switch field actuators |
| Application | ET 200pro distributed I/O stations |
Mixed field signals
Four inputs and four outputs combine sensing and actuation.
Protected outputs
Electronic short-circuit protection is provided per output channel.
Separate connection face
Select the matching M12 connection module for the field cables.
Product Overview
6ES7143-4BF50-0AA0 combines four P-reading digital inputs with four current-sourcing 24 V DC outputs in the ET 200pro system.
The inputs and output loads are supplied from 2L+, and the output channels are rated at 0.5 A each. Short-circuit diagnostics and green channel status indicators support local fault checks.
Key Functions
Read sensors at the machine
The four inputs use IEC 61131 Type 3 characteristics and accept two-wire sensors with a maximum 1.5 mA quiescent current.
Control DC actuators
The four outputs can operate solenoid valves, DC contactors and indicator lamps within the 0.5 A per-channel limit.
Locate output and supply faults
Diagnostic information is available for output short circuits and encoder-supply short circuits, alongside green input and output status indication.
Official Specifications
| Digital Input and Output Channels | 4 inputs and 4 current-sourcing outputs |
|---|---|
| Rated Load and Input Voltage | 24 V DC |
| Input Signal Thresholds | Signal 0: −3 to +5 V; signal 1: +11 to +30 V |
| Input Characteristic | P-reading; IEC 61131 Type 3 |
| Typical Signal-1 Input Current | 7 mA |
| Maximum Input Delay | 3 ms for either transition |
| Maximum Unshielded Field Cable | 30 m for inputs and outputs |
| Rated Output Current | 0.5 A per channel |
| Total Output Current | 2 A per group up to 55°C, all mounting positions |
| Minimum Signal-1 Output Voltage | 2L+ − 0.8 V |
| Maximum Off-State Residual Current | 0.5 mA |
| Output Short-Circuit Protection | Electronic per channel; typical threshold 0.7 A |
| Inductive Turn-Off Voltage Limit | Typically 2L+ − 47 V |
| Maximum Switching Frequency | Resistive: 100 Hz; inductive: 0.5 Hz; lamp: 1 Hz |
| Maximum Lamp Load | 5 W |
| Encoder Supply Current | 1 A maximum up to 55°C |
| Typical Power Loss | 2 W |
| Backplane Isolation | Isolated from all other circuit components; 707 V DC type test |
| Channel Status Indication | Green LEDs for digital inputs and outputs |
| Dimensions and Weight | 45 × 130 × 35 mm (W × H × D); approximately 140 g |
Frequently Asked Questions
Does 6ES7143-4BF50-0AA0 come with the field connection module?
No, the bus module is included but the I/O connection module must be ordered separately.
Can I use 6ES7143-4BF50-0AA0 with the CM IO 4xM12 connection face?
Yes, CM IO 4xM12 and CM IO 4xM12P connection modules provide the listed four-socket field connection.
Which pins carry the input and output signals for 6ES7143-4BF50-0AA0?
On each of the four M12 sockets, pin 4 carries the digital input and pin 2 carries the corresponding digital output.
Can I parallel outputs on 6ES7143-4BF50-0AA0 to obtain more than 0.5 A?
No, parallel operation is allowed for redundant load control but not to increase output current.
Will 6ES7143-4BF50-0AA0 accept a two-wire sensor?
Yes, a two-wire sensor can be connected when its quiescent current does not exceed 1.5 mA.
What lamp load can one output of 6ES7143-4BF50-0AA0 switch?
The maximum lamp load is 5 W.
How quickly can 6ES7143-4BF50-0AA0 switch an inductive actuator?
The maximum switching frequency for an inductive load is 0.5 Hz.