EN
Siemens SIMATIC ET 200iSP PS 24 V DC 6ES7138-7EA01-0AA0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMATIC ET 200iSP - Intrinsically safe distributed-I/O power supply module
6ES7138-7EA01-0AA0 SIMATIC ET 200iSP PS 24 V DC
Siemens specifies this 24 V DC power supply module for ET 200iSP, with redundancy capability, galvanic isolation and hazardous-area approvals.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7138-7EA01-0AA0 |
| Product Type | Intrinsically safe distributed-I/O power supply module |
| Core Function | Supplies ET 200iSP stations from a 24 V DC source with galvanic isolation |
| Application or Compatible Series | ET 200iSP stations in hazardous-area automation systems |
Product Overview
Siemens specifies this 24 V DC power supply module for ET 200iSP, with redundancy capability, galvanic isolation and hazardous-area approvals.
Official Siemens documentation identifies the product for ET 200iSP stations in hazardous-area automation systems. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
ET 200iSP Power Delivery
The module supplies the station backplane and connected electronics.
Redundancy Capability
Redundant operation is supported for availability-focused configurations.
Hazardous-Area Design
The certified construction is intended for ET 200iSP installations in hazardous locations.
Official Specifications
| Rated Input Voltage | 24 V DC |
|---|---|
| Permissible Input Range | 19.2 to 30 V DC |
| Reverse-Polarity Protection | Yes |
| Maximum Input Current | 4 A |
| Maximum Output Current | 5 A |
| Typical Power Loss | 20 W |
| Backplane Buffering | At least 0.25 ms |
| Power-Bus Buffering | At least 0.25 ms |
| IM 152 CPU Buffering | At least 15 ms |
| Redundancy Capability | Yes |
| Status Indicator | Yes |
| Diagnostic Readout | Via IM 152 |
| Primary-to-Secondary Isolation | Yes |
| Supply-to-Electronics Isolation | Yes |
| Isolation Test Voltage | 600 V DC between supply and output |
| Protection Rating | IP30 |
| Operating Temperature | -20 to +70 °C |
| Dimensions | 60 x 190 x 136.5 mm |
| Approximate Weight | 2.7 kg |
Frequently Asked Questions
What DC input window is allowed for 6ES7138-7EA01-0AA0?
The input may range from 19.2 to 30 V DC and includes reverse-polarity protection.
Can 6ES7138-7EA01-0AA0 be installed in a redundant power arrangement?
Yes, the module supports redundant operation.
How much output current can 6ES7138-7EA01-0AA0 deliver?
The maximum output current is 5 A.
What buffering is available for the IM 152 CPU from 6ES7138-7EA01-0AA0?
The IM 152 CPU supply is buffered for at least 15 ms.
Where can diagnostics for 6ES7138-7EA01-0AA0 be read?
Status and diagnostic information can be read through the IM 152.
Is the input electrically separated from the output in 6ES7138-7EA01-0AA0?
Yes, primary and secondary circuits are galvanically isolated and tested at 600 V DC.
What cabinet space is required for 6ES7138-7EA01-0AA0?
Allow for dimensions of 60 x 190 x 136.5 mm and a mass of approximately 2.7 kg.
Compatibility & Ordering Notes
Compatibility Checklist for 6ES7138-7EA01-0AA0
- Match SIMATIC ET 200iSP PS 24 V DC and the full article number character by character.
- Verify permissible input range: 19.2 to 30 V DC.
- Confirm typical power loss: 20 W.
- Preserve the approved settings and connection records used in ET 200iSP stations in hazardous-area automation systems.
