Siemens SIMATIC ET 200iSP 6ES7135-7TD00-0AB0 4 AO HART
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC ET 200iSP
6ES7135-7TD00-0AB0 4 AO HART Analog Output Module
Siemens 6ES7135-7TD00-0AB0 is a four-channel SIMATIC ET 200iSP analog output electronic module for 4–20 mA process signals with HART protocol communication and channel diagnostics.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7135-7TD00-0AB0 |
| Product Type | Four-channel HART analog output module |
| Core Function | Outputs four 4–20 mA process signals with HART communication |
| Application or Compatible Series | SIMATIC ET 200iSP distributed I/O systems |
Loop Compatibility
Match every two-wire current loop to the supported load, cable length and HART device requirements.
Power and Base Unit
Verify the ET 200iSP station arrangement, 24 V supply and matching terminal assignment before installation.
Hazardous-Area Check
Confirm the project-specific intrinsic-safety parameters and installation approvals for the field circuit.
Product Overview
Siemens 6ES7135-7TD00-0AB0 is a four-channel SIMATIC ET 200iSP analog output electronic module for 4–20 mA process signals with HART protocol communication and channel diagnostics.
Four independent channels provide standard process current signals with HART communication. Diagnostic alarms cover wire break, short circuit and module faults with status indication. The module is designed for distributed process I/O stations, including approved hazardous-area applications.
Key Functions
Four HART Current Outputs
Four independent channels provide standard process current signals with HART communication.
Integrated Channel Diagnostics
Diagnostic alarms cover wire break, short circuit and module faults with status indication.
ET 200iSP Integration
The module is designed for distributed process I/O stations, including approved hazardous-area applications.
Official Specifications
| Hardware Function Status | 17 |
|---|---|
| Firmware Version | V3.0.4 |
| Rated Supply Voltage | 24 V DC |
| Permitted Supply Range | 20.4 to 28.8 V DC |
| Current Consumption | 295 mA typical |
| Maximum Load-Bus Current | 330 mA |
| Power Loss | 2.7 W typical |
| Analog Outputs | 4 |
| Maximum Cycle Time for All Channels | 3.6 ms |
| Current Ranges | 0 to 20 mA and 4 to 20 mA |
| Output Connection | Two-wire connection |
| Maximum Output Load | 750 ohms |
| Maximum Shielded Cable Length | 500 m |
| Output Resolution | 14 bit |
| Resistive-Load Settling Time | 4 ms |
| Capacitive-Load Settling Time | 40 ms |
| Inductive-Load Settling Time | 40 ms |
| Basic Error Limit | 0.1 percent |
| Operational Error Limit | 0.15 percent |
| Degree of Protection | IP30 |
Frequently Asked Questions
How many HART loops can 6ES7135-7TD00-0AB0 operate?
It provides four independent analog output channels for compatible current loops with HART communication.
Which current ranges are available on 6ES7135-7TD00-0AB0?
The channels support zero to twenty milliamps and four to twenty milliamps.
What loop load is permitted for 6ES7135-7TD00-0AB0?
The connected output loop must not exceed seven hundred fifty ohms.
Can 6ES7135-7TD00-0AB0 detect field-wiring faults?
Yes, channel diagnostics can report wire-break and short-circuit conditions.
What cable length can be used with 6ES7135-7TD00-0AB0?
A shielded output cable may be up to five hundred metres when the installation conditions are satisfied.
What must be checked for hazardous-area use of 6ES7135-7TD00-0AB0?
Verify the field-circuit intrinsic-safety values, station configuration and applicable installation approvals.
What should be recorded before replacing 6ES7135-7TD00-0AB0?
Record channel parameters, HART device assignments, terminal wiring and diagnostic settings before exchange.
Compatibility & Ordering Notes
Compatibility Checklist
- Confirm that the module position and terminal arrangement match the installed SIMATIC ET 200iSP station.
- Check every connected loop against the supported current range, 750-ohm load limit and shielded-cable length.
- Validate HART assignments and hazardous-area circuit parameters before commissioning.