EN
Siemens SIMATIC DP ET 200B 16-Relay Output Module 6ES7132-0HH01-0XB0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC DP ET 200B
6ES7132-0HH01-0XB0 SIMATIC DP ET 200B 16-Relay Output Module
This ET 200B digital electronic submodule provides sixteen relay outputs for 120/230 V AC loads and is designed for the matching TB6/AC terminal block.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7132-0HH01-0XB0 |
| Product Type | Sixteen-channel relay digital output electronic submodule |
| Core Function | Switches AC field loads through sixteen relay outputs |
| Application or Compatible Series | ET 200B stations using the TB6/AC relay terminal block |
Exact Identification
Match 6ES7132-0HH01-0XB0 character by character and confirm the complete SIMATIC DP ET 200B 16-Relay Output Module designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
This ET 200B digital electronic submodule provides sixteen relay outputs for 120/230 V AC loads and is designed for the matching TB6/AC terminal block.
The module switches sixteen independent digital load circuits through relay contacts. The documented output circuits are intended for 120/230 V AC applications. The electronics submodule plugs into the 16-channel TB6/AC screw-terminal base.
Key Functions
Sixteen Relay Outputs
The module switches sixteen independent digital load circuits through relay contacts.
AC Load Operation
The documented output circuits are intended for 120/230 V AC applications.
Matching ET 200B Terminal Block
The electronics submodule plugs into the 16-channel TB6/AC screw-terminal base.
Official Specifications
| Digital Outputs | 16 |
|---|---|
| Output Technology | Relay contacts |
| Rated Load Voltage | 120/230 V AC |
| Output Current Rating | 2/4 A according to the specified load condition |
| Maximum Switching Voltage | 230 V AC |
| Module Width | 235 mm |
| Compatible Terminal Block | TB6/AC |
| Terminal Type | Screw-type |
| Terminal Block Construction | 3-tier |
| Terminal Block Channel Count | 16 |
| Degree of Protection | IP20 |
| Bus System | PROFIBUS DP through the ET 200B station |
Frequently Asked Questions
How many relay outputs are available on 6ES7132-0HH01-0XB0?
The electronic submodule provides sixteen relay-output channels.
Which load voltage is intended for 6ES7132-0HH01-0XB0?
The documented output circuits are designed for 120/230 V AC loads.
Which terminal block is required for 6ES7132-0HH01-0XB0?
Use the matching 16-channel TB6/AC screw-terminal block.
Can 6ES7132-0HH01-0XB0 switch 24 V DC transistor loads directly?
It is a relay-output variant specified for AC switching, so the actual load category and contact rating must be confirmed before connection.
What enclosure protection applies to 6ES7132-0HH01-0XB0?
The module is rated IP20 and therefore requires installation inside a suitable control enclosure.
Can 6ES7132-0HH01-0XB0 replace a 24 V DC ET 200B output module without rewiring?
No; the relay output type, TB6/AC terminal block and field-voltage arrangement must all match.
What should be verified before installing 6ES7132-0HH01-0XB0?
Confirm the TB6/AC base, channel wiring, load current, switching voltage, PROFIBUS station configuration and protective devices.
Compatibility & Ordering Notes
Compatibility Checklist
- Use the submodule only with the specified ET 200B TB6/AC terminal block.
- Check each connected load against the relay contact voltage, current and utilization limits.
- De-energize and verify all AC circuits before moving the electronic submodule.
