Siemens 6ES7131-6BH00-0BA0 SIMATIC ET 200SP DI 16x24VDC ST Input Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match the BaseUnit type and CC00 color assignment.
- Use the positive-reading input polarity required by the connected sensors.
- Include the input data and selected quality-information bytes in the address plan.
- Configure module-level wire-break and supply monitoring as required.
- Use the engineering support for the installed firmware and hardware generation.
6ES7131-6BH00-0BA0 SIMATIC ET 200SP DI 16x24VDC ST Input Module
A sixteen-channel positive-reading input module with selectable input delays, quality information and module diagnostics.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7131-6BH00-0BA0 |
| Product Type | Standard digital-input module |
| Core Function | Collecting discrete sensor states |
| Application | ET 200SP stations |
Sixteen inputs
The P-reading inputs process 24 V DC sensor signals.
BaseUnit match
The module uses type A0 BaseUnits with color code CC00.
Configurable diagnostics
Supply-voltage and module-level wire-break monitoring support commissioning.
Product Overview
6ES7131-6BH00-0BA0 collects sixteen digital input states in an ET 200SP station. The Standard module uses positive-reading inputs and supports I&M0 through I&M3 identification data.
Selectable input delays adapt the signal filtering to the application. Diagnostic interrupts, supply monitoring and module-level wire-break diagnostics complement the local PWR, channel-status and DIAG indicators.
Key Functions
Acquire PNP sensor states
Sixteen P-reading channels receive positive 24 V DC input signals.
Adjust the input response
Eight input-delay settings are available, with an additional cable-dependent propagation delay.
Report module conditions
Diagnostic interrupts and module-level diagnostics provide supply and wire-break information.
Official Specifications
| Digital inputs | 16 |
|---|---|
| Rated supply and permitted range | 24 V DC; 19.2–28.8 V DC |
| Maximum current consumption | 90 mA |
| Typical power loss | 1.7 W |
| Input polarity | Sinking, positive-reading input |
| IEC 61131 input characteristics | Type 1 and type 3 |
| Input signal thresholds | Signal 0: −30 to +5 V; signal 1: +11 to +30 V |
| Typical signal-1 current | 2.5 mA |
| Input-delay settings | 0.05, 0.1, 0.4, 0.8, 1.6, 3.2, 12.8 or 20 ms, plus 30–500 µs depending on cable length |
| Maximum cable length | 1000 m shielded; 600 m unshielded |
| Input address space | 2 bytes; an additional 2 bytes for quality information |
| Maximum two-wire sensor quiescent current | 1.5 mA |
| Diagnostic coverage | Configurable supply-voltage monitoring; wire break by module; group error |
| Local indicators | Green PWR and channel LEDs; green/red DIAG LED |
| Electrical separation | Channels separated from the backplane bus; no separation between channels |
| Permitted circuit potential difference | 75 V DC / 60 V AC, basic insulation |
| Insulation type-test voltage | 707 V DC |
| Module width | 15 mm |
| Approximate weight | 28 g |
Frequently Asked Questions
Which BaseUnit and color code should I match for 6ES7131-6BH00-0BA0?
Use a type A0 BaseUnit and the CC00 module color code.
Can I select the input filtering of 6ES7131-6BH00-0BA0?
Eight delay settings from 0.05 to 20 ms are available, with a further 30–500 µs delay depending on cable length.
How much input address space should I allocate to 6ES7131-6BH00-0BA0?
The input data requires two bytes and enabled quality information requires another two bytes.
Does 6ES7131-6BH00-0BA0 accept the positive signal from a PNP sensor?
The module has positive-reading sinking inputs for PNP sensor signals.
Does wire-break monitoring on 6ES7131-6BH00-0BA0 identify an individual channel?
Wire-break diagnostics are assigned at module level.
Can I update the firmware of 6ES7131-6BH00-0BA0?
The V1.1 module supports firmware updating.
Can 6ES7131-6BH00-0BA0 itself supply 24 V to the connected sensors?
The module does not provide an integrated 24 V sensor supply.