Siemens 6ES7131-4BD50-0AA0 SIMATIC ET 200S Four-Channel Source Input Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Match sensor operation to the L+-referenced input thresholds.
- Choose a compatible terminal module such as TM-E15S24-A1, TM-E15S24-01, TM-E15S23-01 or TM-E15S26-A1.
- Keep two-wire sensor bias current within 1.5 mA and sensor-supply output current within 500 mA.
- Include the 2.0 to 4.5 ms input delay in the signal timing assessment.
6ES7131-4BD50-0AA0 SIMATIC ET 200S Four-Channel Source Input Module
A four-channel source-input module for 24 V DC switches and proximity sensors in an ET 200S station.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7131-4BD50-0AA0 |
| Product Type | Standard digital input module |
| Core Function | Acquire discrete field-sensor signals |
| Application | ET 200S remote I/O stations |
Source-input design
Input voltage thresholds are referenced to L+ for this SRC variant.
Sensor connections
Compatible terminal modules support two- and three-conductor layouts.
Input filtering
Both signal transitions have a typical 3 ms input delay.
Product Overview
6ES7131-4BD50-0AA0 acquires four discrete signals through the ET 200S 4DI 24 V DC/SRC Standard input stage.
The source-input circuit is intended for switches and proximity switches. Its sensor-supply output is rated at 500 mA, while the input channels share a common potential and are isolated from the backplane bus.
Key Functions
Read source-input signals
The SRC circuit evaluates signal 1 from −15 to −30 V and signal 0 from +30 to −5 V relative to L+.
Filter discrete transitions
Both rising and falling transitions have a typical 3 ms delay, with a 2.0 to 4.5 ms range.
Connect proximity sensors
Two-wire BEROs can be connected when their bias current does not exceed 1.5 mA.
Official Specifications
| Digital Inputs | 4 |
|---|---|
| Rated Supply and Input Voltage | 24 V DC |
| Signal-1 Voltage Relative to L+ | −15 to −30 V |
| Signal-0 Voltage Relative to L+ | +30 to −5 V |
| Signal-1 Input Current | 7 mA typical at 24 V |
| Input Delay in Either Direction | 3 ms typical; 2.0 to 4.5 ms |
| Input Characteristic | IEC 61131, Type 1 |
| Two-Wire Sensor Bias Current | 1.5 mA maximum |
| Sensor-Supply Output Current | 500 mA rated; 0 to 500 mA permitted |
| Loaded Sensor-Supply Voltage | M + 0.5 V maximum |
| Maximum Field Cable Length | 600 m unshielded; 1,000 m shielded |
| Channel Isolation | Not isolated from each other; isolated from the backplane bus |
| Permissible Circuit Potential Difference | 75 V DC or 60 V AC |
| Insulation Test Voltage | 500 V DC |
| Supply Reverse-Polarity Protection | Provided |
| Typical Power Dissipation | 0.7 W |
| Input Status Indication | One green LED per channel |
| Diagnostic Functions | Not provided |
| Dimensions (W × H × D) | 15 × 81 × 52 mm |
| Approximate Weight | 35 g |
Frequently Asked Questions
What should I check before replacing another 4DI module with 6ES7131-4BD50-0AA0?
Match the source-input SRC circuit and its L+-referenced voltage thresholds to the installed sensor wiring.
Can a two-wire proximity switch operate with 6ES7131-4BD50-0AA0?
Yes, a two-wire BERO can be used when its bias current is no more than 1.5 mA.
Will 6ES7131-4BD50-0AA0 capture a very short pulse without delay?
No, both input transitions have a typical 3 ms delay with a 2.0 to 4.5 ms range.
Which reference potential applies to the thresholds of 6ES7131-4BD50-0AA0?
The signal thresholds are referenced to L+ rather than to M.
Can the sensor-supply output of 6ES7131-4BD50-0AA0 deliver 800 mA?
No, the sensor-supply output is rated at 500 mA.
Does 6ES7131-4BD50-0AA0 provide channel diagnostic messages?
No, it provides green channel status LEDs but no diagnostic functions.
What field-cable lengths can I plan with 6ES7131-4BD50-0AA0?
The maximum cable length is 600 m for unshielded cable and 1,000 m for shielded cable.