Siemens SIMATIC ET 200L-SC 6ES7131-1BL11-0XB0 32 DI Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
Siemens · SIMATIC ET 200L-SC
6ES7131-1BL11-0XB0 L-SC 32 DI DC 24 V Electronics Block
Siemens 6ES7131-1BL11-0XB0 is an expandable SIMATIC ET 200L-SC digital-input electronics block for 32 DC 24 V field signals and PROFIBUS-DP communication.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6ES7131-1BL11-0XB0 |
| Product Type | Digital input electronics block |
| Core Function | Acquires 32 DC 24 V signals in two 16-channel groups |
| Application or Compatible Series | SIMATIC ET 200L-SC with TB 16SC connection |
Terminal Base
Confirm the TB 16SC connection and field-signal grouping.
Sensor Circuits
Match 24 V DC switches or two-wire proximity sensors to the input characteristics.
PROFIBUS Setup
Retain the station address, baud rate and diagnostic wiring used in the project.
Product Overview
Siemens 6ES7131-1BL11-0XB0 is an expandable SIMATIC ET 200L-SC digital-input electronics block for 32 DC 24 V field signals and PROFIBUS-DP communication.
The electronics block collects 32 field inputs arranged as two groups of 16. PROFIBUS-DP communication supports the documented ET 200L-SC baud rates and diagnostics. Per-channel status plus bus, supply and group-error indications aid commissioning and fault finding.
Key Functions
High-Density Digital Acquisition
The electronics block collects 32 field inputs arranged as two groups of 16.
ET 200L-SC Bus Integration
PROFIBUS-DP communication supports the documented ET 200L-SC baud rates and diagnostics.
Channel and Group Diagnostics
Per-channel status plus bus, supply and group-error indications aid commissioning and fault finding.
Official Specifications
| Dimensions | 145 × 60 × 60.5 mm (W × H × D) |
|---|---|
| Approximate Weight | 150 g |
| PROFIBUS-DP Baud Rates | 9.6, 19.2, 93.75, 187.5, 500 and 1,500 kbaud |
| Unshielded Cable Length | Maximum 600 m |
| Shielded Cable Length | Maximum 1,000 m |
| Manufacturer Identifier | 8029H |
| Electronics Supply Voltage | 24 V DC |
| Power-Failure Withstand | At least 20 ms |
| Rated Load Voltage | 24 V DC |
| Channel Isolation | No galvanic isolation between channels |
| Bus Isolation | Galvanic isolation between channels and PROFIBUS-DP |
| Insulation Test Voltage | 500 V DC |
| Maximum Electronics-Supply Current | 180 mA from L4+/L5+ |
| Maximum No-Load Group Current | 100 mA per load group |
| Typical Power Loss | 4.8 W |
| Status Indication | One green LED per channel |
| Input Signal 1 Range | 13 to 30 V DC |
| Input Signal 0 Range | -30 to 5 V DC |
| Typical Input Current | 5 mA at 24 V for signal 1 |
| Input Delay and Characteristic | 2.0 to 4.5 ms in either direction; IEC 1131-2 Type 1 |
Frequently Asked Questions
Which field devices suit 6ES7131-1BL11-0XB0 inputs?
The block accepts DC 24 V switches and compatible two-wire proximity sensors that meet the stated input limits.
What terminal arrangement is needed for 6ES7131-1BL11-0XB0?
Use the documented TB 16SC connection and preserve the two 16-channel input groups.
Which PROFIBUS rates are available with 6ES7131-1BL11-0XB0?
The station supports rates from 9.6 kbaud through 1,500 kbaud as listed for the module.
Are the channels of 6ES7131-1BL11-0XB0 galvanically isolated from each other?
The channels are not isolated from one another, while the input circuitry is isolated from PROFIBUS-DP.
How quickly does 6ES7131-1BL11-0XB0 register an input transition?
The specified delay is 2.0 to 4.5 ms for either transition direction.
What diagnostics are visible on 6ES7131-1BL11-0XB0?
Green channel LEDs show input status, while separate indicators report bus, supply and group faults.
What should I verify before replacing 6ES7131-1BL11-0XB0?
Record the PROFIBUS address, terminal wiring, channel allocation and station configuration before isolating the unit.
Compatibility & Ordering Notes
Compatibility Checklist
- Use the correct ET 200L-SC terminal block and preserve all four supply and return groups.
- Retain the PROFIBUS address and the station hardware configuration in the master project.
- Check every connected sensor against the signal-voltage, current and two-wire leakage limits.