EN
Siemens SITOP PSU8200 6EP1437-3BA10 24 V DC 40 A Stabilized Power Supply
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Romania
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Size conductors and upstream protection for the documented input and output currents.
- Maintain adequate cabinet ventilation and the required installation clearances.
- Verify the output setting and load behavior before reconnecting the complete control system.
SIEMENS · SITOP PSU8200
6EP1437-3BA10 24 V DC 40 A Stabilized Power Supply
The 6EP1437-3BA10 SITOP PSU8200 is a three-phase regulated power supply with a 400 to 500 V AC input and a 24 V DC, 40 A output for industrial automation loads.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6EP1437-3BA10 |
| Product Type | Three-phase regulated industrial power supply |
| Core Function | Converts a 400 to 500 V three-phase AC input into a regulated 24 V DC, 40 A output |
| Application or Compatible Series | Industrial control systems requiring a high-current SITOP 24 V DC supply |
Exact Identification
Match 6EP1437-3BA10 character by character before replacement.
Interface Check
Confirm the installed supply, terminals, network and field wiring.
Project Backup
Preserve the validated configuration and application data before exchange.
Product Overview
The 6EP1437-3BA10 SITOP PSU8200 is a three-phase regulated power supply with a 400 to 500 V AC input and a 24 V DC, 40 A output for industrial automation loads.
The regulated 40 A output provides up to 960 W at the rated 24 V DC setting. The input stage accepts the documented industrial three-phase voltage range at 50 or 60 Hz. The output voltage can be trimmed to compensate for permissible wiring voltage drops.
Key Functions
High-Current DC Supply
The regulated 40 A output provides up to 960 W at the rated 24 V DC setting.
Wide Three-Phase Input Range
The input stage accepts the documented industrial three-phase voltage range at 50 or 60 Hz.
Adjustable Output
The output voltage can be trimmed to compensate for permissible wiring voltage drops.
Official Specifications
| Rated Input Voltage | 3-phase AC 400 to 500 V |
|---|---|
| Permissible Input Range | 3-phase AC 320 to 575 V |
| Input Frequency | 50/60 Hz |
| Rated Input Current | 2.6 to 2.1 A |
| Maximum Inrush Current | Less than 56 A |
| Mains Buffer Time | More than 15 ms at 400 V AC |
| Rated Output Voltage | 24 V DC |
| Adjustable Output Range | 24 to 28.8 V DC |
| Rated Output Current | 40 A |
| Rated Output Power | 960 W |
| Recommended Input Protection | 10 to 16 A, characteristic C, three-pole coupled |
| Parallel Operation | Permitted according to the SITOP operating instructions |
| Protection Degree | IP20 |
| Approximate Net Weight | 3.4 kg |
Frequently Asked Questions
Which incoming supply is required for 6EP1437-3BA10?
Use a protected three-phase AC source within the documented voltage and frequency limits.
What continuous load can 6EP1437-3BA10 supply?
The rated output is 24 V DC at 40 A, corresponding to 960 W.
Can the output of 6EP1437-3BA10 be adjusted?
The voltage can be set within the documented range to compensate for allowable line drop.
Which upstream protection suits 6EP1437-3BA10?
Use a three-pole coupled protective device sized according to the installation instructions.
What should be checked before replacing 6EP1437-3BA10?
Confirm the three-phase input, conductor size, load current, output setting and cabinet ventilation.
May 6EP1437-3BA10 operate in parallel with another unit?
Parallel operation is permitted only when the wiring and current-sharing conditions in the operating instructions are followed.
What commissioning measurements are needed for 6EP1437-3BA10?
Measure input voltage, output voltage, load current and protective-earth continuity before energizing the loads.
