Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1333 3ba20 sitop modular 24 v 5 a power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1333-3BA20 SITOP Modular 24 V 5 A Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SITOP PSU200M

6EP1333-3BA20 SITOP Modular 24 V 5 A Power Supply

A SITOP modular supply with a regulated 24 V DC output, 5 A rated current and selectable wide-range AC input.

At a Glance

Brand Siemens
Model 6EP1333-3BA20
Product Type Stabilized DIN-rail power supply
Core Function Isolated DC power conversion
Application Industrial 24 V control circuits

Selectable AC input

The input selector supports the 120–230 V and 230–500 V AC supply ranges for one- or two-phase operation.

Adjustable control power

The output potentiometer adjusts the regulated DC voltage from 24 to 28.8 V for the connected control circuit.

Defined overload response

Selectable constant-current operation or latching shutdown provides a defined response to an output short circuit.

Product Overview

6EP1333-3BA20 provides a regulated, electrically isolated DC supply for industrial control equipment.

The output can be adjusted up to 28.8 V, while selectable overload behavior supports either a constant-current characteristic or latching shutdown; front LEDs indicate normal operation, overload and shutdown states.

Ordering focus: Match the AC selector setting, 5 A load requirement, mounting clearances and desired overload characteristic before installation.
Key Functions

Selectable AC input

The input selector supports the 120–230 V and 230–500 V AC supply ranges for one- or two-phase operation.

Adjustable control power

The output potentiometer adjusts the regulated DC voltage from 24 to 28.8 V for the connected control circuit.

Defined overload response

Selectable constant-current operation or latching shutdown provides a defined response to an output short circuit.

Official Specifications
Nominal AC input ranges 120–230 V or 230–500 V, selected on the device
Permissible AC input ranges 85–264 V or 176–550 V
Line frequency 47–63 Hz; nominal 50/60 Hz
Rated DC output 24 V, 5 A, 120 W
Output adjustment 24–28.8 V DC by potentiometer
Maximum residual ripple 50 mV
Maximum voltage peaks 200 mV
Mains buffering at rated load At least 25 ms
Typical short-circuit boost 15 A for 25 ms during operation
Short-circuit characteristic Approximately 5.5 A constant current or latching shutdown
Typical efficiency 87%
Typical power loss 18 W at rated output
Protection IP20; electrical protection class I
Operating temperature −25 to 70 °C with natural convection
Enclosure dimensions 70 × 125 × 125 mm
Required ventilation clearance 50 mm above and below; 0 mm at each side
Mounting rail EN 60715, 35 × 7.5 mm or 35 × 15 mm
Terminal conductors 0.2–2.5 mm², screw terminals
Net weight 1.2 kg
Frequently Asked Questions

How should I set the input selector on 6EP1333-3BA20?

Select the 120–230 V or 230–500 V AC input range to match the connected supply before energizing the unit.

Can 6EP1333-3BA20 compensate for a modest voltage drop in the DC wiring?

The output potentiometer allows adjustment from 24 to 28.8 V DC within the connected equipment voltage limits.

What happens if the output of 6EP1333-3BA20 is shorted?

The selectable response is approximately 5.5 A constant current or latching shutdown.

How much vertical ventilation space does 6EP1333-3BA20 require?

Maintain at least 50 mm of free space above and below the housing for natural convection.

Can two 6EP1333-3BA20 supplies be paralleled to increase available power?

Up to two units can be connected in parallel using the selectable characteristic intended for that arrangement.

Which rail should I use to mount 6EP1333-3BA20?

The housing snaps onto an EN 60715 rail measuring 35 × 7.5 mm or 35 × 15 mm.

How can I distinguish overload from shutdown on 6EP1333-3BA20?

The yellow LED indicates overload and the red LED indicates latching shutdown, while the green LED indicates 24 V OK.

Compatibility & Ordering Notes
Before ordering 6EP1333-3BA20: Match the AC selector setting, 5 A load requirement, mounting clearances and desired overload characteristic before installation.

Before installation

  • Set the AC input selector before connecting power.
  • Size the upstream protective device for the selected one- or two-phase supply arrangement.
  • Keep 50 mm ventilation space above and below the supply.
  • Use the appropriate signaling or buffer module when the application needs those additional functions.
Hot Selling Models
R164T60B
ISE70-N02-65-P
BA9054/010 0053631
G262
DIL2AM-G
6SE3290-0DA87-2RA0
DIL00M4-G
63031487
5983.53
6ES5700-0LA11
BES0236 BES 517-385-VC-S4
16/8-LK-2MBD
VBA-2E1A-G10-ZAL/E2L-1M-2V1-W
S7-300 6ES7331-7KB02-0AB0
110.240.5440

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.