Siemens 6EP1332-4BA00 SIMATIC PM 1507 24 V DC 3 A Power Supply
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Calculate the total load against the 3 A output rating.
- Use S7-1500-rail mounting.
- Leave 40 mm clearance above and below.
- Observe the lower 40 °C operating limit for vertical mounting.
- Use 0.5–2.5 mm² conductors at the removable input and output terminals.
- This article has no hazardous-area Ex approval.
6EP1332-4BA00 SIMATIC PM 1507 24 V DC 3 A Power Supply
A 72 W PM 1507 load supply with automatic AC range selection, fixed 24 V DC output and S7-1500-rail mounting.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6EP1332-4BA00 |
| Product Type | Load power-supply module |
| Core Function | Converts mains power to regulated DC |
| Application | S7-1500 control and field-load power circuits |
AC input selection
Automatically selects the 120 V or 230 V mains range.
Regulated DC output
Provides fixed 24 V DC at up to 3 A.
Panel integration
Mounts on the S7-1500 rail with removable terminals.
Product Overview
6EP1332-4BA00 is a stabilized PM 1507 load power supply for SIMATIC S7-1500 applications.
Its isolated output supplies 24 V DC loads, with electronic short-circuit shutdown, automatic restart and separate indicators for normal operation, error and standby.
Key Functions
Automatic mains-range handling
The input automatically selects between 85–132 V AC and 170–264 V AC.
Protected load supply
Electronic shutdown with automatic restart handles output short circuits, while an additional control loop limits overvoltage.
Load and status management
The fixed 24 V output supplies up to 3 A, and green, red and yellow indicators identify its operating state.
Official Specifications
| AC input ranges | 85–132 V AC or 170–264 V AC; automatic range selection |
|---|---|
| Input frequency | 45–65 Hz |
| Rated input current | 1.4 A at 120 V; 0.8 A at 230 V |
| Maximum inrush current | 23 A at 25 °C |
| Output voltage | 24 V DC, fixed |
| Output-current range | 0–3 A |
| Rated output power | 72 W |
| Overall voltage tolerance | 1% |
| Maximum residual ripple | 50 mV |
| Maximum voltage peaks | 150 mV |
| Minimum mains buffering | 20 ms at rated output current and 93/187 V AC input |
| Typical efficiency | 87% |
| Typical rated-load power loss | 11 W |
| Current limiting | 3.15–3.6 A; 3.4 A typical |
| Output short-circuit response | Electronic shutdown with automatic restart |
| Overvoltage limitation | Below 28.8 V by an additional control loop |
| Operating temperature | 0–60 °C horizontal; 0–40 °C vertical mounting |
| Storage and transport temperature | −40 to +85 °C |
| Protection and isolation | IP20, Class I; isolated SELV output |
| Dimensions and weight | 50 × 147 × 129 mm (W × H × D); 0.45 kg |
Frequently Asked Questions
Do I need a manual mains-voltage selector for 6EP1332-4BA00?
The supply automatically selects its 120 V or 230 V AC input range.
Can I adjust the output voltage of 6EP1332-4BA00?
The regulated output is fixed at 24 V DC and is not adjustable.
Can two units of 6EP1332-4BA00 increase the available power?
Two supplies may be connected in parallel for increased power under the specified installation arrangement.
What happens after a short circuit at the output of 6EP1332-4BA00?
The supply shuts down electronically and restarts automatically.
Can I mount 6EP1332-4BA00 on a standard 35 mm DIN rail?
The module mounts on the S7-1500 rail rather than a standard DIN rail or wall.
How much free space should I leave around 6EP1332-4BA00?
Leave at least 40 mm above and below the supply, with no required spacing at either side.
Which feeder breaker is recommended for 6EP1332-4BA00?
Use a 10 A type-B or 6 A type-C miniature circuit breaker as the recommended feeder protection.