Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1332 2ba10 sitop smart 24 v 2 5 a power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1332-2BA10 SITOP Smart 24 V 2.5 A Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SITOP smart

6EP1332-2BA10 SITOP Smart 24 V 2.5 A Power Supply

60 W DIN-rail supply with selectable 120/230 V AC input and adjustable 22.8–28 V DC output.

At a Glance

Brand Siemens
Model 6EP1332-2BA10
Product Type Stabilized DC power supply
Core Function Conversion of single-phase AC to regulated DC
Application Industrial 24 V control power

Selectable mains input

A device selector chooses the 85–132 V or 170–264 V AC operating range.

Adjustable regulated output

The output potentiometer sets the DC voltage between 22.8 and 28 V around the nominal 24 V rating.

Protected DC control supply

Output current limiting, overvoltage protection and a green 24 V OK LED support control-power operation and monitoring.

Product Overview

6EP1332-2BA10 supplies regulated 24 V DC control power from a single-phase 120 V or 230 V AC source, with the input range selected on the device.

The 2.5 A SITOP smart unit combines a 32.5 mm wide DIN-rail housing, adjustable output voltage and constant-current short-circuit protection for compact control cabinets.

Ordering focus: Set the input selector to the available mains voltage before energizing the supply, and size the DC load for the 2.5 A nominal rating.
Key Functions

Selectable mains input

A device selector chooses the 85–132 V or 170–264 V AC operating range.

Adjustable regulated output

The output potentiometer sets the DC voltage between 22.8 and 28 V around the nominal 24 V rating.

Protected DC control supply

Output current limiting, overvoltage protection and a green 24 V OK LED support control-power operation and monitoring.

Official Specifications
Input selection and voltage ranges 120/230 V AC selector; 85–132 V or 170–264 V AC
Line frequency 47–63 Hz
Rated input current 1.1 A at 120 V; 0.65 A at 230 V
Maximum inrush current 27 A at 25°C
Mains buffering time 20 ms minimum at rated output current and input of 93/187 V
Nominal DC output 24 V, 2.5 A, 60 W
Output adjustment range 22.8–28 V DC
Additional output-current capability Up to 3 A at ambient temperatures up to +45°C
Output ripple 10 mV typical; 150 mV maximum
Output voltage peaks 50 mV typical; 240 mV maximum
Efficiency and power loss 85%; 9 W typical
Current-limiting threshold 3.2–3.4 A with constant-current characteristic
Overvoltage protection Below 33 V
Output indication Green LED for 24 V OK
Electrical protection Isolated safety extra-low DC output; protection class I
Degree of protection IP20
Operating ambient 0 to +60°C with natural convection
Storage and transport temperature −40 to +85°C
Input and output terminals Screw connections for 0.5–2.5 mm² conductors
Housing and mass 32.5 × 125 × 125 mm (W × H × D); 0.32 kg
Frequently Asked Questions

Will 6EP1332-2BA10 automatically change between 120 V and 230 V mains?

The input range must be set using the selector switch on the device.

Can I raise the DC voltage of 6EP1332-2BA10 above 24 V?

The potentiometer allows an output setting from 22.8 to 28 V DC.

When can 6EP1332-2BA10 supply a 3 A load?

The available output-current range extends to 3 A at ambient temperatures up to +45°C.

How long can 6EP1332-2BA10 bridge a brief mains interruption?

The minimum buffering time is 20 ms at rated output current with an input of 93 V or 187 V.

How much clear space is needed above and below 6EP1332-2BA10?

Leave 50 mm above and 50 mm below the housing for natural-convection cooling.

Can I mount 6EP1332-2BA10 directly to a wall?

The unit snaps onto a 35 × 7.5 mm or 35 × 15 mm DIN rail and does not provide wall mounting.

Can two units of 6EP1332-2BA10 be connected for increased power?

Two supplies may be connected in parallel to increase the available output power.

Compatibility & Ordering Notes
Before ordering 6EP1332-2BA10: Set the input selector to the available mains voltage before energizing the supply, and size the DC load for the 2.5 A nominal rating.

Before installation

  • Set the mains selector before applying power and provide the required protective-earth connection.
  • Use the recommended feeder protection appropriate to the installation, with a miniature circuit breaker from 3 A characteristic C as specified for this supply.
  • Mount on a 35 mm DIN rail and keep 50 mm ventilation space above and below.
  • Keep the load within the nominal rating or the specified 3 A capability up to +45°C, and set the output voltage for the connected equipment.
Hot Selling Models
ADVU-32-25-APA
5005808.16
H07V-K 1X1.5 4520061
XS1M18DA210L1
AL164000
1749TB3
BK3000
FAZ-B25/4
5005808.16 50 058 08.16
ABB AL164000
IBIL24DI16HW/FW
1749TB3 92414871
5SG7133-8BA25
G9SX-AD322-T15
5.7/24 370-750-00

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.