Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1331 5ba00 sitop psu100c 24 v 0 6 a power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1331-5BA00 SITOP PSU100C 24 V 0.6 A Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SITOP PSU100C

6EP1331-5BA00 SITOP PSU100C 24 V 0.6 A Power Supply

22.5 mm wide PSU100C with fixed 24 V, 0.6 A output, wide AC/DC input, electronic short-circuit shutdown and automatic restart.

At a Glance

Brand Siemens
Model 6EP1331-5BA00
Product Type Stabilized DIN-rail power supply
Core Function Isolated regulated 24 V DC output
Application Compact industrial control and auxiliary power circuits

Wide AC/DC input

The input accepts 85–264 V AC or 110–300 V DC within the specified supply conditions.

Fixed regulated output

The isolated 24 V DC output supplies up to 0.6 A without an output-voltage adjustment.

Automatic short-circuit recovery

Electronic shutdown and automatic restart handle a short circuit according to the specified protection characteristic.

Product Overview

6EP1331-5BA00 is a compact SITOP PSU100C stabilized power supply rated at 24 V DC and 0.6 A. It accepts a wide single-phase AC or DC input and provides an isolated output for industrial control loads.

The output is fixed at 24 V and is not adjustable. A green LED indicates output voltage OK, while electronic shutdown with automatic restart provides the documented short-circuit response. The narrow housing snaps onto a 35 mm DIN rail.

Ordering focus: Check the fixed 24 V / 0.6 A output against the load budget, provide the Class I PE connection and retain 50 mm clearance above and below.
Key Functions

Wide AC/DC input

The input accepts 85–264 V AC or 110–300 V DC within the specified supply conditions.

Fixed regulated output

The isolated 24 V DC output supplies up to 0.6 A without an output-voltage adjustment.

Automatic short-circuit recovery

Electronic shutdown and automatic restart handle a short circuit according to the specified protection characteristic.

Official Specifications
Rated AC input 100–230 V AC; permissible range 85–264 V
DC input range 110–300 V DC
Input frequency 47–63 Hz
Rated output 24 V DC, 0.6 A
Output-voltage adjustment Not adjustable
Typical output power 14 W
Input current 0.28 A at 100 V AC; 0.18 A at 230 V AC
Maximum inrush current 28 A at 25 °C
Minimum mains buffering 20 ms at 230 V input and rated output current
Overall voltage tolerance 3%
Maximum ripple / voltage peak 200 mV / 300 mV
Start-up behavior Approximately 5% output overshoot; maximum delay 1 s
Efficiency 82%
Power loss 2.6 W typical at rated load; 0.75 W maximum at no load
Short-circuit protection Electronic shutdown with automatic restart; typical 0.7 A
Parallel operation Not supported
Electrical protection Class I; isolated SELV output; IP20
Operating / storage temperature −20 to +70 °C with natural convection / −40 to +85 °C
Dimensions and weight 22.5 × 80 × 100 mm (W × H × D); 0.12 kg
Installation clearance 50 mm above and below; 0 mm on either side
Frequently Asked Questions

Can the output voltage of 6EP1331-5BA00 be adjusted?

No; the PSU100C variant has a fixed 24 V DC output.

May two units of 6EP1331-5BA00 be paralleled to increase output current?

No; parallel operation is not supported for this power-supply variant.

Does 6EP1331-5BA00 require a protective-earth connection?

Yes; it is a Class I power supply with L, N and PE input terminals.

What power-interruption buffering is specified for 6EP1331-5BA00?

The minimum buffering time is 20 ms at 230 V input and rated output current.

Does 6EP1331-5BA00 start without any output overshoot?

The specified start-up characteristic includes approximately 5% output-voltage overshoot.

How much vertical clearance is needed around 6EP1331-5BA00?

Keep 50 mm above and 50 mm below the housing for the specified installation arrangement.

What is the short-circuit recovery behavior of 6EP1331-5BA00?

The protection uses electronic shutdown with automatic restart.

Compatibility & Ordering Notes
Before ordering 6EP1331-5BA00: Check the fixed 24 V / 0.6 A output against the load budget, provide the Class I PE connection and retain 50 mm clearance above and below.

Before installation

  • Calculate the steady and transient load demand for the 0.6 A output and the fixed 24 V setting.
  • Connect PE and use the specified 0.5–2.5 mm² conductors and terminal arrangement.
  • Mount on a suitable 35 mm DIN rail with 50 mm top/bottom spacing and natural convection.
  • Check feeder protection; Siemens recommends a miniature circuit breaker from 16 A characteristic B or 10 A characteristic C.
Hot Selling Models
LTS-1180-304
7700-74718-S4W0500
MKB25-10RNZ 3F1-33
4061-50x90
300/AH 1029700000
00125372 6014C
ERBM390R100W 13565482
EIZ-EAWA9393 3x500V
MER-74/50
PPE16 1896210000
ADVU-25-40-APA-S2
FAZ-C6/3
ESX10-TA-100-DC24V-4A
EP63 C32 566602 60898
CP-A08-M12-5POL 175640

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.