Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 6ep1331 1sl11 sitop power 2 24 v 2 a power supply-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 6EP1331-1SL11 SITOP Power 2 24 V 2 A Power Supply

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SITOP Power Basic Line

6EP1331-1SL11 SITOP Power 2 24 V 2 A Power Supply

A 24 V DC, 2 A SITOP supply with selectable 120/230 V AC input, natural-convection cooling and short-circuit automatic restart.

At a Glance

Brand Siemens
Model 6EP1331-1SL11
Product Type Rail-mounted power supply
Core Function Stabilized DC control power
Application Industrial control cabinets

Selectable mains input

The voltage selector chooses the 85–132 V or 170–264 V AC operating window.

Protected DC output

The output is short-circuit-proof and open-circuit-proof, with automatic restart after an output short circuit.

Convection-cooled installation

Vertical DIN-rail installation with terminals at the bottom and clear ventilation space supports natural cooling.

Product Overview

6EP1331-1SL11 provides a floating, stabilized 24 V DC output from a single-phase AC supply.

The input selector matches the 120 V or 230 V range, while current limitation and automatic restart after an output short circuit define the supply’s overload behavior.

Ordering focus: Set the AC input selector correctly, keep the output demand within 2 A and provide at least 40 mm of ventilation space above and below.
Key Functions

Selectable mains input

The voltage selector chooses the 85–132 V or 170–264 V AC operating window.

Protected DC output

The output is short-circuit-proof and open-circuit-proof, with automatic restart after an output short circuit.

Convection-cooled installation

Vertical DIN-rail installation with terminals at the bottom and clear ventilation space supports natural cooling.

Official Specifications
Nominal input 120/230 V AC, single phase, 50/60 Hz
Input voltage windows 85–132 V AC or 170–264 V AC
Input current 0.9 A at 120 V; 0.6 A at 230 V
Power consumption 58 W
DC output voltage 24 V ±3%
Output current range 0–2 A
Maximum ripple Less than 150 mV peak-to-peak
Maximum switching spikes Less than 240 mV peak-to-peak
Full-load efficiency Above 82% at 230 V AC
Inrush characteristic Less than 20 A at 25 °C and 230 V AC; I²t of 1 A²s
Recommended upstream breaker 3 A, characteristic C
Current limitation Typically 1.1–1.3 times rated current
Mains buffering More than 20 ms at 93/187 V input and full load
Protection IP20; protection class I; SELV output
Operating temperature 0 to +60 °C
Storage and transport temperature −40 to +85 °C
Cooling Natural air convection
Mounting rail DIN EN 50022, 35 × 15 mm
Terminal wiring 0.5–2.5 mm²; recommended screw torque 0.4–0.6 Nm
Weight 0.42 kg
Frequently Asked Questions

How should I set the mains selector on 6EP1331-1SL11?

Use the 120 V position for 85–132 V AC and the 230 V position for 170–264 V AC.

Can I parallel two 6EP1331-1SL11 supplies to obtain more output current?

Parallel connection to increase output power is not permitted.

Can two identical 6EP1331-1SL11 supplies be connected in series?

Two units of the same type may be connected in series to increase the output voltage.

What clearance does 6EP1331-1SL11 need for cooling?

Leave at least 40 mm of free space above and below the vertically installed supply.

What happens after an output short circuit on 6EP1331-1SL11?

The supply uses current limitation and restarts automatically after the short-circuit condition clears.

Where should the wiring terminals face when mounting 6EP1331-1SL11?

Install the supply vertically with both input and output terminals at the bottom.

What tightening torque should I use on the terminals of 6EP1331-1SL11?

The recommended terminal-screw torque is 0.4–0.6 Nm.

Compatibility & Ordering Notes
Before ordering 6EP1331-1SL11: Set the AC input selector correctly, keep the output demand within 2 A and provide at least 40 mm of ventilation space above and below.

Before installation

  • Set the input-voltage selector before energizing the supply.
  • Install vertically with terminals downward and at least 40 mm clearance above and below.
  • Use the specified conductor range and recommended screw torque.
  • Do not parallel units for higher current; use only the permitted same-type series arrangement when a higher voltage is required.
Hot Selling Models
ZK2030-1200-0100
MM2-4TX1
ADN-12-70-IPAQ-S2-5K8
KSA-3-20 031000073 7-409-00-016-0
6FC9344-3QA
MA-1.1s
6ED1055-1CB10-0BA2
Allen-Bradley 800T-QB24
UHV 150
IL9151.12 0049135
2668710000 AITB 6BB2CBL
3RV1 421-1HA10
0801 V4 332-020-04
T4000-DNA25C
NXD32/25

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.