EN
Siemens SIMADYN D CS14 Fiber-Optic Interface Module 6DD1660-0BA0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS · SIMADYN D
6DD1660-0BA0 SIMADYN D CS14 Fiber-Optic Interface Module
The SIMADYN D CS14 is a fiber-optic interface module built from a CS12 and two ICS1 modules for point-to-point communication with as many as eight distributed slave stations.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DD1660-0BA0 |
| Product Type | fiber-optic interface and communication module |
| Core Function | Links a SIMADYN D master to distributed slave stations over fiber optic cables |
| Application or Compatible Series | SIMADYN D systems using CS12-based L-bus and C-bus communication |
Exact Identification
Match 6DD1660-0BA0 character by character and confirm the complete SIMADYN D CS14 Fiber-Optic Interface Module designation.
Interface Arrangement
Confirm the installed supply, ports, field connections and required accessories before wiring the replacement.
Configuration Check
Preserve the approved engineering project, network parameters and application data used by the installed system.
Product Overview
The SIMADYN D CS14 is a fiber-optic interface module built from a CS12 and two ICS1 modules for point-to-point communication with as many as eight distributed slave stations.
Fiber-optic point-to-point links can connect as many as eight slave stations at distances up to 200 metres. The master can distribute basic sampling time, alarm interrupt and clock interrupt signals to connected slaves. The CS12 section provides 128 KB of RAM for communication data exchange over the supported buses.
Key Functions
Distributed Slave Connection
Fiber-optic point-to-point links can connect as many as eight slave stations at distances up to 200 metres.
Deterministic Signal Transfer
The master can distribute basic sampling time, alarm interrupt and clock interrupt signals to connected slaves.
Integrated Communication Memory
The CS12 section provides 128 KB of RAM for communication data exchange over the supported buses.
Official Specifications
| Module Composition | 1 x CS12 and 2 x ICS1 |
|---|---|
| Maximum Slave Stations | 8 |
| Transmission Medium | Fiber-optic point-to-point connection |
| Maximum Link Length | 200 m |
| Communication RAM | 128 KB |
| Normal-Bus Transfer Time per 16 Bits | Approximately 5 µs |
| High-Load Transfer Time per 16 Bits | Maximum approximately 32 µs |
| Master Timing Signal | Basic sampling time |
| Master Interrupt Signals | Alarm and clock interrupts |
| Local Bus Interface | L bus |
| System Bus Interface | C bus |
| SR6(V) Rack Use | Not permitted |
| Slave Data Path | C bus |
Frequently Asked Questions
How many slave stations can 6DD1660-0BA0 connect?
The module supports fiber-optic point-to-point links to as many as eight slaves.
What is the maximum fiber length for 6DD1660-0BA0?
Each supported point-to-point connection can be up to 200 metres long.
Which timing signals can 6DD1660-0BA0 distribute?
The master can distribute the basic sampling time together with alarm and clock interrupt signals.
How much communication memory is available on 6DD1660-0BA0?
The CS12 section provides 128 KB of RAM.
Can 6DD1660-0BA0 be used in an SR6(V) rack?
No; that rack arrangement is not supported because slave data is transferred through the C bus.
What should be recorded before replacing 6DD1660-0BA0?
Record slave addresses, topology, sampling times, interrupt assignments and the complete SIMADYN configuration.
What should I inspect when commissioning 6DD1660-0BA0?
Check fiber routing and polarity, link length, bus seating, rack type and the configured slave sequence.
Compatibility & Ordering Notes
Compatibility Checklist
- Use the module only in a supported SIMADYN D rack and bus arrangement.
- Confirm the configured slave sequence and every point-to-point fiber link.
- Preserve sampling-time, interrupt and communication settings before replacement.
