EN
Siemens SIMADYN D PM6 6DD1600-0AK0
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
SIEMENS SIMADYN D - CPU module
6DD1600-0AK0 SIMADYN D PM6
Siemens documents the PM6 CPU module for control tasks requiring high computing performance or large programs.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DD1600-0AK0 |
| Product Type | CPU module |
| Core Function | High-performance control and regulation processing |
| Application or Compatible Series | SIMADYN D automation systems |
Product Overview
Siemens documents the PM6 CPU module for control tasks requiring high computing performance or large programs.
Official Siemens documentation identifies the product for SIMADYN D automation systems. Selection and commissioning should follow the documented electrical, interface, memory, environmental and mechanical values shown below.
Key Functions
RISC Processing
The 32/64-bit RISC architecture is documented at 64/128 MHz.
Fast Control Cycles
Minimum cycle times of 0.1 ms and typical control-loop projects around 0.5 ms are specified.
Configurable Program Storage
STEP 7, HW Config and CFC projects load through supported MS-series memory modules.
Official Specifications
| Binary Inputs | 8 |
|---|---|
| Alarm-Task Inputs | Maximum 4 of the binary inputs |
| Processor Architecture | 32/64-bit RISC |
| Processor Clock | 64/128 MHz |
| DRAM | 8 MB standard; 16 MB variant |
| Buffered SRAM | 256 KB |
| Fastest Cycle Time | 0.1 ms |
| Typical Control-Loop Cycle | Approximately 0.5 ms |
| Engineering Tools | STEP 7 / HW Config and CFC |
| Program Memory Modules | MS5, MS51 or MS52 |
| Offline Loading | PCMCIA PC-card programming adapter |
| Online Loading | Serial communication from the engineering PC |
| Battery Backup | Via the module rack or an external battery |
| Saved Process Values | Up to 1,000 using the SAV function block |
| Retained Diagnostic Data | Exception buffer, message-system data and trace data |
Frequently Asked Questions
What type of control work is 6DD1600-0AK0 intended to handle?
The PM6 CPU is designed for high-performance open-loop and closed-loop control with large application programs.
How many binary inputs are available on 6DD1600-0AK0?
Eight binary inputs are provided, and up to four can trigger interrupt tasks.
Which processor architecture is used by 6DD1600-0AK0?
The module uses a 32/64-bit RISC processor operating at 64 or 128 MHz depending on version.
What onboard memory is provided by 6DD1600-0AK0?
The module provides 8 MB of DRAM in the standard version and 256 KB of buffered SRAM.
How fast can a control cycle run on 6DD1600-0AK0?
The shortest cycle is 0.1 ms, while a typical control loop is about 0.5 ms.
Which program memory modules are paired with 6DD1600-0AK0?
The configured program is stored on an MS5 or MS51 program memory module.
Which engineering tools are used to configure 6DD1600-0AK0?
The hardware is configured with STEP 7 and HW Config, while the control application is created in CFC.
Compatibility & Ordering Notes
Compatibility Checklist for 6DD1600-0AK0
- Match SIMADYN D PM6 and the full article number character by character.
- Verify alarm-task inputs: Maximum 4 of the binary inputs.
- Confirm buffered sram: 256 KB.
- Preserve the approved settings and connection records used in SIMADYN D automation systems.
