EN
Siemens SIMADYN D PM6 6DD1600-0AK0
Fabricator: Siemens
Status: Novissimum
Tempus Expectatus: In Stoc
Origo: Germania
Praestatio: 12 menses
Email: [email protected]
whatsapp: +86-18150117685
- Praevisio
- Productum Overview
- Functiones Principales
- Official Specifications
- FREQUENTLY ASKED QUESTIONS
- Compatibility & Ordering Notes
- Hot Selling Models
- Pròdòt ràccumandà
Praevisio
SIEMENS SIMADYN D — modul usus centralis processus (CPU)
6DD1600-0AK0 SIMADYN D PM6
Siemens documentat modulum CPU PM6 pro operibus controlis quae altam potentiam computandi aut magnos programmatos exigunt.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DD1600-0AK0 |
| Product Type | Modulus CPU |
| Functio principalis | Processus controlis et regulandi altae potentiae |
| Applicatio vel series compatibiles | Systemata automationis SIMADYN D |
Productum Overview
Siemens documentat modulum CPU PM6 pro operibus controlis quae altam potentiam computandi aut magnos programmatos exigunt.
Documentatio officialis Siemens identificat productum pro systematibus automationis SIMADYN D. Selectio et commissio sequi debent valores electricos, interfaciales, memoriales, ambientales et mechanicos infra demonstratos, qui in documentis sunt.
Functiones Principales
Elaboratio RISC
Architectura RISC 32/64-bit docetur ad 64/128 MHz.
Cycli Controlis Celeres
Tempora cycli minima 0,1 ms et projecta typica circuitus controlis circa 0,5 ms specificantur.
Memoria Programmatum Configurabilis
Projecta STEP 7, HW Config et CFC onerantur per modulos memoriales seriei MS supportatos.
Official Specifications
| Ingressus binarii | 8 |
|---|---|
| Ingressus Admunitionis | Maximum 4 ingressus binarii |
| Architectura Processoris | 32/64-bit RISC |
| Horologium Processoris | 64/128 MHz |
| DRAM | 8 MB standardis; 16 MB varians |
| SRAM cum buffero | 256 KB |
| Celerrimus tempus cycli | 0,1 ms |
| Typicus cyclus buccae controlis | Circa 0.5 ms |
| Instrumenta technica | STEP 7 / Configuratio HW et CFC |
| Moduli memoriae programmatum | MS5, MS51 aut MS52 |
| Off-line incaricatio | Adaptator pro programmatione PCMCIA PC-card |
| On-line incaricatio | Communicatio serialis ab engineering PC |
| Pugna tergum | Per modulum rack aut per batteriam externam |
| Valores processus servati | Usque ad 1 000 per blocum functionis SAV |
| Data diagnosticorum retenta | Buffer exceptionis, data systematis nuntiorum et data trace |
FREQUENTLY ASKED QUESTIONS
What type of control work is 6DD1600-0AK0 intended to handle?
The PM6 CPU is designed for high-performance open-loop and closed-loop control with large application programs.
How many binary inputs are available on 6DD1600-0AK0?
Eight binary inputs are provided, and up to four can trigger interrupt tasks.
Which processor architecture is used by 6DD1600-0AK0?
The module uses a 32/64-bit RISC processor operating at 64 or 128 MHz depending on version.
What onboard memory is provided by 6DD1600-0AK0?
The module provides 8 MB of DRAM in the standard version and 256 KB of buffered SRAM.
How fast can a control cycle run on 6DD1600-0AK0?
The shortest cycle is 0.1 ms, while a typical control loop is about 0.5 ms.
Which program memory modules are paired with 6DD1600-0AK0?
The configured program is stored on an MS5 or MS51 program memory module.
Which engineering tools are used to configure 6DD1600-0AK0?
The hardware is configured with STEP 7 and HW Config, while the control application is created in CFC.
Compatibility & Ordering Notes
Compatibility Checklist for 6DD1600-0AK0
- Match SIMADYN D PM6 and the full article number character by character.
- Verify alarm-task inputs: Maximum 4 of the binary inputs.
- Confirm buffered sram: 256 KB.
- Servare regulatas adprobatas et notulas coniunctionis quas systemata automationis SIMADYN D utuntur.
