Siemens 3RK1903-0AL10 SIMATIC ET 200S TM-RS130-S31 Terminal Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use RS1e-x High Feature reversing-starter hardware.
- Provide an existing upstream power-bus supply for the S31 throughfeed arrangement.
- Fit PE/N blocks before connecting terminal modules.
- Allow the additional height and depth of starter and accessory assemblies.
- Cover the final module’s open power-bus contacts before commissioning.
3RK1903-0AL10 SIMATIC ET 200S TM-RS130-S31 Terminal Module
A 130 mm TM-RS130-S31 terminal module for an ET 200S High Feature reversing starter, with power-bus throughfeed and no supply-line connection.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 3RK1903-0AL10 |
| Product Type | Motor-starter terminal module |
| Core Function | Power-bus throughfeed and prewiring |
| Application | RS1e-x High Feature reversing starters |
Throughfeed version
The S31 arrangement continues the power bus without a new supply-line connection.
Reversing-starter base
The terminal base is assigned to RS1e-x High Feature reversing starters.
Prewired assembly
Screw-terminal wiring and separate PE/N terminal blocks support station assembly before the starter is fitted.
Product Overview
3RK1903-0AL10 forms the TM-RS130-S31 terminal base beneath an ET 200S RS1e-x High Feature reversing starter, continuing the station power bus through the load group.
The base supports prewiring, screw-terminal field connections and expansion with two PE/N terminal blocks, while the separate reversing-starter assembly provides the motor-control electronics and switching components.
Key Functions
Continue the station power bus
The S31 terminal-module version provides power-bus throughfeed without a supply-line connection.
Prepare the field wiring
Screw-type terminals permit prewiring before the matching reversing starter is installed.
Accommodate protective-conductor connections
Two PE/N terminal blocks can extend the base and must be fitted before the motor-starter terminal modules are connected.
Official Specifications
| Installation Dimensions (W × H × D) | 130 × 290 × 100 mm |
|---|---|
| Height with PE/N Terminal Blocks | 332 mm |
| Depth with Motor Starter | 150 mm |
| Depth with Motor Starter and 2DI COM Module | 173 mm |
| Rated Power-Bus Voltage | 500 V AC |
| Rated Power-Bus Current | 50 A |
| Rated Frequency | 50/60 Hz |
| Rated Insulation Voltage | 690 V |
| Rated Impulse Withstand Voltage | 6 kV |
| Front Protection | IP20; IP00 in the L1–L3, T1–T3, N and PE connection compartment |
| Terminal Connection | Screw-type terminals |
| Terminal Tightening Torque | 2.0–2.5 N·m |
| Tool Arrangement | Standard screwdriver size 2 and Pozidriv 2 |
| Net Weight | 843 g |
Frequently Asked Questions
Can 3RK1903-0AL10 introduce a new supply line into a motor-starter group?
The S31 version provides power-bus throughfeed without a supply-line connection.
Which reversing-starter family fits 3RK1903-0AL10?
The base is assigned to ET 200S RS1e-x High Feature reversing starters.
Can I prewire 3RK1903-0AL10 before fitting the starter?
The terminal module permits prewiring through its screw-type connections.
When should I fit the PE/N blocks for 3RK1903-0AL10?
Install the PE/N terminal blocks before connecting the motor-starter terminal modules.
How much depth is needed for 3RK1903-0AL10 with the starter installed?
The assembly depth with the motor starter is 150 mm.
What torque applies to the terminals of 3RK1903-0AL10?
Tighten the terminals to 2.0–2.5 N·m.
What is required at the end of a load group containing 3RK1903-0AL10?
Fit protective caps firmly over the exposed power-bus contacts of the final terminal module before commissioning.