Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
siemens 3ra1903 0ab10 et 200s tm ds45 s31 throughfeed terminal module-0

For SIEMENS

Home >  Products >  For SIEMENS

Siemens 3RA1903-0AB10 ET 200S TM-DS45-S31 Throughfeed Terminal Module

Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
SIEMENS SIMATIC ET 200S Motor Starters

3RA1903-0AB10 ET 200S TM-DS45-S31 Throughfeed Terminal Module

A TM-DS45-S31 terminal base for a standard direct starter, with screw connections and power-bus throughfeed rather than an infeed connection.

At a Glance

Brand Siemens
Model 3RA1903-0AB10
Product Type Motor-starter terminal module
Core Function Mechanical and electrical integration of direct starters
Application ET 200S standard DS1-x starter stations

Throughfeed arrangement

The S31 terminal module passes the power bus through the starter station.

Standard direct starter

The TM-DS45 base is assigned to the DS1-x standard direct-starter arrangement.

Prepare field wiring

Screw terminals allow prewiring before the starter electronics are fitted.

Product Overview

3RA1903-0AB10 provides the TM-DS45-S31 throughfeed terminal-base arrangement for an ET 200S standard direct starter. The module supports screw-terminal field wiring and passes the power bus onward without providing the supply-line infeed arrangement of the S32 version.

The power-bus rating and the starter-branch rating describe different current paths. The AUX1 conductor passes through without its own terminals, and the open power-bus contacts at the end of a load group require the specified protective caps.

Ordering focus: Use the S31 throughfeed arrangement for the DS1-x starter and coordinate the power-bus rating, branch load and end-of-group protection.
Key Functions

Continue the power bus

The S31 module provides power-bus throughfeed without the S32 infeed connection.

Support prewired starter positions

Screw terminals permit the field wiring to be prepared before fitting the direct starter.

Integrate protective conductors

The terminal-base arrangement can be expanded with the appropriate PE/N terminal block.

Official Specifications
Rated power-bus operating voltage 500 V AC
Rated insulation voltage 690 V
Rated impulse withstand 6 kV
Power-bus operating current 40 A for the TM-DS45 arrangement
Power-bus frequency 50/60 Hz
Starter-branch current limit 12 A for the standard DS1-x arrangement
Electrical connection Screw terminals
Front and connection-region protection IP20 at the front; IP00 at the main power-terminal connection region
AUX1 conductor arrangement Throughfeed without terminals
Drawing dimensions 51.9 × 264 × 119 mm overall (W × H × D); module body width 44.9 mm
Net weight 348 g
Frequently Asked Questions

Can 3RA1903-0AB10 be used as the power-bus infeed terminal module?

The S31 arrangement provides throughfeed rather than the infeed connection of the S32 version.

Which standard motor starter fits the TM-DS45 arrangement of 3RA1903-0AB10?

The terminal module is assigned to the ET 200S DS1-x standard direct starter.

Can I finish field wiring on 3RA1903-0AB10 before fitting the starter?

The screw-terminal base permits prewiring before the starter electronics are installed.

Does the 40 A power-bus rating of 3RA1903-0AB10 also describe its starter branch?

The throughfeed bus is rated at 40 A, while the standard direct-starter branch has a 12 A limit.

Does 3RA1903-0AB10 provide dedicated terminals for AUX1?

The AUX1 conductor is fed through without terminals.

What protection is needed when 3RA1903-0AB10 is the last terminal module in a load group?

Seal the open power-bus contacts with the specified protective caps before commissioning.

When should I install the PE/N terminal block for 3RA1903-0AB10?

Install the PE/N terminal block before connecting the motor-starter terminal modules.

Compatibility & Ordering Notes
Before ordering 3RA1903-0AB10: Select the S31 throughfeed base for a standard DS1-x direct starter and fit the required PE/N expansion and end-of-group protective components.

Compatibility Checklist for 3RA1903-0AB10

  • Use the S31 arrangement for throughfeed and the S32 version where an infeed connection is required.
  • Match the terminal base to the standard DS1-x direct starter.
  • Install PE/N terminal blocks before connecting the starter terminal modules.
  • Fit the specified caps to exposed power-bus contacts at the end of the load group.
Hot Selling Models
GM40
NZ1VZ511EM
NZ1VZ528AL060
6ES5434-4UA12
6ES5530-3LA12
HS321BR
C60N C25 400V 23777
VCCF3 019400
6ES5430-4UA14
BRC038263981
KG-2008-ABOA KG0002
6ES5535-3MA12
3RV1742-5ED10
6ES7193-1CL00-0XA0
SAC-3P-M12Y/2XM12FS

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.