SANTAK 730-80141-00P AS400 Short UPS Monitoring Card
Manufacturer: SANTAK
Condition: Brand New
Lead Time: In Stock
Origin: China
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Confirm a compatible short-card intelligent slot.
- Check the AS400 monitoring capability of the host system.
- Order the optional slot assembly if the UPS requires it.
- Select the AS400, NMC or CMC monitoring route for the available slot.
- Keep the separate RS232 monitoring connection distinct from the AS400 card.
730-80141-00P AS400 Short UPS Monitoring Card
A short-form AS400 monitoring option for compatible SANTAK UPS smart slots and host systems using contact-state monitoring.
At a Glance
| Brand | SANTAK |
|---|---|
| Model | 730-80141-00P |
| Product Type | UPS monitoring option card |
| Core Function | Reporting UPS operating states |
| Application | Compatible SANTAK Castle UPS systems |
AS400 host connection
The monitoring host uses its AS400 interface to observe the UPS.
Short-card format
The option fits the compatible rear smart slot for short cards.
Dedicated slot option
AS400, network-management and centralized-monitoring cards are separate choices.
Product Overview
730-80141-00P provides the AS400 monitoring option for compatible SANTAK Castle UPS systems. It is the short-card article listed for the rear intelligent-slot arrangement.
The card provides a contact-signal route to a monitoring host equipped for AS400 operation. The standard RS232 connection and optional NMC network card provide different communication routes, so the selected monitoring method and available smart slot must be checked before ordering.
Key Functions
Report UPS contact states
The AS400 interface presents UPS operating-state information as contact signals.
Link the monitoring host
An AS400-equipped system uses its monitoring function to observe the connected UPS.
Fit the rear intelligent slot
The short-card format integrates into the compatible UPS option slot.
Official Specifications
| Signal interface | Dry-contact signals |
|---|---|
| Card form factor | Short card for a rear intelligent slot |
| Relay-contact component limits | 24 V DC and 1 A maximum |
| Diode component limits | 6 V reverse voltage; 80 mA forward current; 1 A peak forward current |
| UPS status outputs | UPS on, utility failure, bypass active, battery low, UPS fault and summary alarm |
| Output contact logic | Normally open or normally closed, selectable with JP1–JP6 |
| Shutdown and self-test input | 3–10 s valid signal for battery-mode shutdown or UPS self-test |
| External contact-common connection | Pin 8 common with external supply up to 24 V DC; ground on pins 1, 3, 6 and 10 |
Frequently Asked Questions
Which rear slot should I match for 730-80141-00P?
Use a compatible intelligent slot intended for a short AS400 card.
Is 730-80141-00P a standard fitted component of the Castle UPS?
The AS400 card is an optional accessory purchased separately.
Can I fit 730-80141-00P together with an NMC or CMC card in the same slot?
The intelligent slot accepts one of the AS400, NMC or CMC card options.
Does 730-80141-00P provide the UPS Internet-monitoring route?
Internet monitoring is provided by the separate NMC network-management card.
What must the host system support to use 730-80141-00P?
The host requires an AS400 interface with the corresponding monitoring function.
Can 730-80141-00P be treated as the standard UPS RS232 port?
The standard RS232 connection is a separate communication route from the AS400 slot card.
Which slot accessory should I match when fitting 730-80141-00P to a Castle C1–3 kVA UPS?
The Castle C1–3 kVA configuration lists the optional 730-80405-00P intelligent-slot accessory.