OMRON W4S1-03B Three-Port Industrial Ethernet Switching Hub
Manufacturer: OMRON
Condition: Brand New
Lead Time: In Stock
Origin: Japan
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Allow for three RJ45 connections at 10 or 100 Mbit/s.
- Select the local QoS setting for the traffic-priority requirement.
- Use an appropriate Ethernet network topology without relying on STP or VLAN features.
- Do not substitute the hub for an EtherCAT junction or the W4S1-05C failure-detection version.
W4S1-03B Three-Port Industrial Ethernet Switching Hub
A three-port industrial switch with 10/100BASE-TX links, automatic cable adaptation and selectable EtherNet/IP control-data priority.
At a Glance
| Brand | OMRON |
|---|---|
| Model | W4S1-03B |
| Product Type | Industrial Ethernet switching hub |
| Core Function | Switching machine-network traffic |
| Application | Ethernet and EtherNet/IP machine networks |
Three RJ45 ports
The ports support 10BASE-T and 100BASE-TX.
Selectable traffic priority
QoS gives EtherNet/IP implicit messages priority over other traffic.
Simple local setup
The hub provides local settings without SNMP or VLAN management.
Product Overview
W4S1-03B connects three Ethernet devices through an industrial switching hub. Automatic negotiation and MDI/MDI-X support simplify the 10/100 Mbit/s port connection.
The hub uses store-and-forward switching and supports QoS for EtherNet/IP control data. This three-port version does not provide the broadcast-storm or internal-LSI error-detection functions of the W4S1-05C.
Key Functions
Switch the machine Ethernet links
Three RJ45 ports support IEEE 802.3 10BASE-T and 100BASE-TX.
Prioritize control data
With QoS enabled, EtherNet/IP implicit messages take priority, followed by IGMP packets and other traffic.
Adapt the cable connection
Auto-negotiation and automatic MDI/MDI-X support the port connection without manual crossover selection.
Official Specifications
| RJ45 ports | 3 |
|---|---|
| Ethernet standards | IEEE 802.3 10BASE-T and 100BASE-TX |
| Switching method | Store and forward |
| Packet buffer | 80 KB |
| MAC-address capacity | 2000 entries |
| Three-port switching fabric | 500 Mbit/s |
| Maximum per-port throughput | 148800 packets/s with 64-byte data at 100 Mbit/s |
| Supply voltage | 24 V DC ±5% |
| Current consumption | 0.22 A |
| Maximum power consumption | 5.28 W |
| Inrush current | 1.42 A peak |
| Operating temperature | 0–55 °C; no icing or condensation |
| Operating humidity | 10–90% RH; no condensation |
| Storage temperature | −20 to +75 °C |
| Vibration resistance | 5–8.4 Hz at 3.5 mm amplitude; 8.4–150 Hz at 9.8 m/s² |
| Shock resistance | 196 m/s² |
| Network-management functions | No SNMP, VLAN, STP, IGMP snooping or port mirroring |
Frequently Asked Questions
Can I use W4S1-03B as an EtherCAT junction?
Industrial switching hubs are not suitable for EtherCAT.
Which traffic does the QoS setting of W4S1-03B prioritize?
With QoS enabled, EtherNet/IP implicit messages have first priority, IGMP packets second and other traffic third.
Do I need to choose a crossover cable specifically for W4S1-03B?
The hub supports automatic MDI/MDI-X cable adaptation.
Can W4S1-03B negotiate with both 10 and 100 Mbit/s devices?
The ports support automatic negotiation for 10BASE-T and 100BASE-TX connections.
Does W4S1-03B provide the failure-detection output of the W4S1-05C?
The three-port version has no broadcast-storm or internal-LSI error-detection function.
Can I configure VLANs or monitor W4S1-03B through SNMP?
The hub supports neither VLAN configuration nor SNMP.
What DC supply tolerance must I provide for W4S1-03B?
The required power supply is 24 V DC within ±5%.