NDNA-02 NDNA-02-KIT DeviceNet Adapter Module , China NDNA-02 NDNA-02-KIT DeviceNet Adapter Module Manufacturers, Suppliers, Factory

Overview

Place of Origin:	Sweden
Brand Name:	ABB
Model Number:	NDNA-02 NDNA-02-KIT
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Specifications

Parameter	Specification
Model	NDNA-02 / NDNA-02-KIT
Dimensions	2.2 × 11.5 × 10 cm
Weight	0.14 kg
Device Type	DeviceNet Adapter Module
Size of Link	2 stations
Topology	Point-to-point
Serial Communication Type	Asynchronous, half Duplex
Transfer Rate	4 Mbit/s
Protocol	Distributed Drives Communication System (DDCS)
Connectors	Blue – receiver; Grey – transmitter
Enclosure	Plastic, 100 × 22.5 × 115 mm (H×W×D), IP20
Mounting	Standard mounting rail
Settings	Through drive parameters and/or DIP switches
Current Consumption	70 mA at 24 V d.c.
Operating Temperature	0 to +50 °C
Operating Humidity	5 to 95 %, no condensation (max 60 % with corrosive gases)
Storage Temperature	-40 to +70 °C
Storage Humidity	Less than 95 %, no condensation
Transportation Temperature	-40 to +70 °C
Transportation Humidity	Less than 95 %, no condensation
Atmospheric Pressure	60 to 106 kPa
Vibration	Max 3.5 mm (2–9 Hz), max 15 m/s² (9–200 Hz) sinusoidal (IEC 60068-2-6)
Shock	Max 100 m/s², 11 ms (IEC 60068-2-27)
Bump	Max 300 m/s², 6 ms (IEC 60068-2-29)
Free Fall	250 mm

Description

The NDNA-02 NDNA-02-KIT DeviceNet Adapter Module is an optional device for ABB drives which enables the connection of the drive to a DeviceNet system. The drive is considered as a slave in the DeviceNet network. Through the NDNA-02 NDNA-02-KIT DeviceNet Adapter Module it is possible to:

• Give control commands to the drive (Start, Stop, Run enable, etc.)

• Feed a motor speed or torque reference to the drive

• Give a process actual value or a process reference to the PID controller of the drive

• Read status information and actual values from the drive

• Read and write drive parameter values

• Reset a drive fault.

The NDNA-02 NDNA-02-KIT acts as a Class 2 slave only with predefined masterslave connection set services. These include the Explicit Messaging, the Poll-Response service, the Bit-Strobe service and the Change of State/Cyclic service.

Applications

Automobile manufacturing plants: Conveyor system control for welding, painting, and final assembly lines.

Food and beverage processing plants: Filling lines, packaging machines, and material handling networks.

Semiconductor plants: Automated material handling equipment in cleanrooms.

Compatibility

The NDNA-02 NDNA-02-KIT is compatible with:

• ACS 400

• ACS 600 SingleDrive

• ACS 600 MultiDrive

• ACS 600 MotionControl (ACP 600)

• ACS 600 CraneDrive (ACC 600)

• ACS 600 Programmable

• ACS 6000

• DCS 500

• DCS 600

• ACS 1000

• All scanners that work according to ODVA DeviceNet specifications. (The NDNA-02 NDNA-02-KIT has been tested with the Allen-Bradley 1747-SDN scanner module.)

Mounting instructions

1. Stop the drive.

2. Switch off the power supply of the drive and all dangerous voltages connected to the inputs and outputs.

3. Wait for five minutes to ensure that the capacitors in the intermediate circuit have discharged.

4. Remove the front cover of the drive.

5. Ensure that the mains cable, motor cable and capacitor bank (UDC+ and UDC–) are not powered.

6. Locate the position for the module (see the drive documentation). Fasten the mounting rail to its place if not already installed. Observe the free space requirements for the module.

7. Push the module onto the rail. The module can be released by

pulling the locking spring with a screwdriver.

FAQ

Q: What is the difference between NDNA-02 and NDNA-02-KIT?
A: NDNA-02 refers only to the module itself; NDNA-02-KIT is a complete package including the module, communication fiber optic/cable, and mounting bracket, facilitating direct field installation.

Q: Can NDNA-02 NDNA-02-KIT be used with the ACS880 series?
A: No. The ACS880 uses the newer FDNA-01 adapter. NDNA-02 is primarily for older ACS600/ACS800 models.

Q: How do I set the node address about NDNA-02 NDNA-02-KIT?
A: There are two rotary switches on the front of the module, representing the tens and units digits of the address, respectively.

Q: Why can some devices connect to the network while others cannot about NDNA-02 NDNA-02-KIT?
A: Please check if the bus length exceeds the maximum limit for the corresponding baud rate, or check if the voltage drop at intermediate nodes is excessive.

Q: Does this NDNA-02 NDNA-02-KIT support hot-swapping?
A: No. The inverter's control power must be disconnected before installing or removing the NDNA-02.