Mitsubishi Electric HC-KFS23G2 200 W Precision Geared Servo Motor
Manufacturer: Mitsubishi Electric
Condition: Brand New
Lead Time: In Stock
Origin: Japan
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Specify the G2 gear ratio before selecting the mechanical mounting arrangement.
- Use the mass and inertia values corresponding to that ratio.
- Connect U, V, W and protective earth to the designated power-connector pins.
- Use the approved HC-KFS amplifier and encoder arrangement and maintain the specified indoor environment.
HC-KFS23G2 200 W Precision Geared Servo Motor
200 W HC-KFS servo motor with a G2 precision reduction gear and high-resolution encoder, available in four reduction-ratio arrangements.
At a Glance
| Brand | Mitsubishi Electric |
|---|---|
| Model | HC-KFS23G2 |
| Product Type | Low-inertia geared AC servo motor |
| Core Function | Precision geared motion |
| Application | Compatible MELSERVO servo-drive systems |
Precision reduction gear
G2 identifies the reduction gear for precision applications.
High-resolution motor feedback
The motor encoder supports absolute and incremental detection with 131,072 pulses per motor revolution.
Ratio-specific mechanical design
The four reduction ratios use different gearbox dimensions and mass values for machine integration.
Product Overview
HC-KFS23G2 combines a 200 W HC-KFS motor with the G2 precision reduction gear for geared motion applications.
The available 1/5, 1/9, 1/20 and 1/29 gear arrangements have different mechanical dimensions, inertia and mass, so the reduction ratio must be selected together with the machine interface.
Key Functions
Precision reduction gear
G2 identifies the reduction gear for precision applications.
High-resolution motor feedback
The motor encoder supports absolute and incremental detection with 131,072 pulses per motor revolution.
Ratio-specific mechanical design
The four reduction ratios use different gearbox dimensions and mass values for machine integration.
Official Specifications
| Rated Motor Output | 200 W |
|---|---|
| Rated Motor-Shaft Speed | 3,000 r/min before reduction |
| Rated Motor Torque | 0.64 Nm before reduction |
| Rated Motor Current | 1.1 A |
| Encoder Resolution | 131,072 pulses per motor revolution |
| Available Reduction Ratios | 1/5, 1/9, 1/20 and 1/29 |
| Gearbox Models by Ratio | BK1-05B-02MEKA, BK2-09B-02MEKA, BK3-20B-02MEKA and BK3-29B-02MEKA |
| Mass by Ratio | 2.1 kg at 1/5; 3.5 kg at 1/9; 5.0 kg at 1/20 or 1/29 |
| Motor Inertia with Gear by Ratio | 0.360, 0.380, 0.530 and 0.450 ×10⁻⁴ kg·m² for 1/5, 1/9, 1/20 and 1/29 respectively |
| Electromagnetic Brake | Without brake |
| Power Lead | 0.3 m; 4-AWG19 |
| Encoder Lead | 0.3 m; connector 1-172169-9 |
| Power Connector Pin Assignment | 1: U; 2: V; 3: W; 4: earth |
| Operating Temperature | 0–40 °C, non-freezing |
| Maximum Operating Humidity | 80% RH, non-condensing |
| Maximum Installation Altitude | 1,000 m |
Frequently Asked Questions
Which gear ratios can I choose for HC-KFS23G2?
The G2 arrangements are available with 1/5, 1/9, 1/20 and 1/29 reduction ratios.
Does HC-KFS23G2 include an electromagnetic holding brake?
This motor designation identifies the version without an electromagnetic brake.
Is the 3,000 r/min rating of HC-KFS23G2 the gearbox output speed?
The 3,000 r/min rating applies to the motor shaft before the selected reduction gear.
Can I use one mechanical drawing for every ratio of HC-KFS23G2?
The gearbox dimensions differ by ratio, so the mounting drawing must match the selected reduction arrangement.
How does the mass of HC-KFS23G2 change with the gear ratio?
The mass is 2.1 kg at 1/5, 3.5 kg at 1/9 and 5.0 kg at 1/20 or 1/29.
Which power-connector pin is protective earth on HC-KFS23G2?
Pin 4 is earth, while pins 1, 2 and 3 connect phases U, V and W.
Can I operate HC-KFS23G2 at 50 °C ambient temperature?
The specified operating temperature is 0–40 °C without freezing.