Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
leuze 96bm c6 2000 s12 odsl 96b optical distance sensor-0

Others

Home >  Products >  Others

Leuze 96BM/C6-2000-S12 ODSL 96B Optical Distance Sensor

Manufacturer: Leuze
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months

  • Overview
  • Hot Selling Models
  • Recommended Products
Overview
Leuze ODSL 96B

96BM/C6-2000-S12 ODSL 96B Optical Distance Sensor

A red-laser distance sensor with a 150–2000 mm measuring range, 4–20 mA output, push-pull switching output and local OLED configuration.

At a Glance

Brand Leuze
Model 96BM/C6-2000-S12
Product Type Optical distance sensor
Core Function Non-contact object-distance measurement
Application Industrial object positioning and measurement

Analog distance feedback

The C6 variant provides a 4–20 mA current output for a load resistance of up to 500 Ω.

Teachable object switching

A push-pull output provides a switching signal, and the switching and analog outputs can be taught for the application.

Local measurement setup

The OLED display shows distance in millimeters, while the keypad and PC software provide configuration access.

Product Overview

96BM/C6-2000-S12 is the current-output ODSL 96B distance-sensor configuration identified by Leuze article number 50106593.

It measures directly against an object and provides an analog distance signal alongside a teachable switching output, with measurement values and configuration available through the OLED display and keypad.

Ordering focus: Match the 4–20 mA current interface, target distance, M12 connection and the PLC analog-input load resistance.
Key Functions

Analog distance feedback

The C6 variant provides a 4–20 mA current output for a load resistance of up to 500 Ω.

Teachable object switching

A push-pull output provides a switching signal, and the switching and analog outputs can be taught for the application.

Local measurement setup

The OLED display shows distance in millimeters, while the keypad and PC software provide configuration access.

Official Specifications
Measurement range 150–2000 mm
Resolution 1–3 mm, depending on distance
Absolute measurement accuracy ±1.5% of distance at 20 °C, midrange supply, 6–90% remission and target size ≥50 × 50 mm
Repeatability ±0.5% of distance for the same object under identical conditions
Black/white deviation At most 1% for 6–90% remission
Light source Visible red laser, 655 nm, laser class 2
Light spot 2 × 6 mm at 2 m
Measurement time 1–5 ms, dependent on target reflectivity and measurement mode
Response and startup time Response at most 15 ms; startup delay at most 300 ms
Supply voltage 18–30 V DC, including residual ripple
Permitted residual ripple At most 15% of supply voltage
Bias current At most 150 mA
Analog output 4–20 mA; maximum load resistance 500 Ω
Switching output Push-pull; high at least UB − 2 V, low at most 2 V
Programmable input 1 digital switching input
Connection M12, 5-pin male, A-coded
Housing and optics Diecast-zinc housing; glass optical cover
Dimensions and weight 30 × 90 × 70 mm; 380 g
Operating and storage temperatures Operation −20 to +50 °C; storage −30 to +70 °C
Protection IP67/IP69K; electrical protection class II
Frequently Asked Questions

Can 96BM/C6-2000-S12 measure a target at 100 mm?

The specified measuring range starts at 150 mm and extends to 2000 mm.

Should I configure a PLC voltage input or current input for 96BM/C6-2000-S12?

Use a current input for the sensor’s 4–20 mA analog output.

What input-load resistance can I connect to the current output of 96BM/C6-2000-S12?

The total analog-output load resistance must not exceed 500 Ω.

Do I need a PC for every adjustment to 96BM/C6-2000-S12?

The sensor provides an OLED display and keypad for local configuration as well as PC software access.

Why can the measuring time of 96BM/C6-2000-S12 vary?

The measuring time depends on target reflectivity and the selected measurement mode.

Can I connect the push-pull outputs of multiple 96BM/C6-2000-S12 sensors in parallel?

The push-pull switching outputs must not be connected in parallel.

Which connector should I prepare for 96BM/C6-2000-S12?

Use a mating connector for the A-coded, five-pin M12 male connection.

Compatibility & Ordering Notes
Before ordering 96BM/C6-2000-S12: Match the 4–20 mA current interface, target distance, M12 connection and the PLC analog-input load resistance.

Before installation

  • Use the C6 current-output configuration and a compatible 4–20 mA PLC input.
  • Keep the analog-output load at or below 500 Ω.
  • Keep the target within 150–2000 mm and account for reflectivity and object size in the measuring setup.
  • Use the permitted M12 connection and maintain the required installation protection.
Hot Selling Models
RL90-18/24
FAZ-K25/3 278913 + FAZ-XHIN11
769-105 51128256
4BU3031092
Allen-Bradley 700-CF220Z
Allen-Bradley 700-CF400Z
3RV1341-4JC10
5SY5125-7
ADN-12-90-APA
DSNU-16-170-PPV
LC1D40A LAD4T3B
50/30(30) 600/5A 5VA Cl.0.5 FS5
535.6101.0
3RV2411-1FA20 3RV2901-2E
C10A10X

Get a Free Quote

Our representative will contact you soon.
Email
Name
Company Name
Message
0/1000
email goToTop

Evolo Automation is not an authorized distributor unless otherwise specified, representative, or affiliate of the manufacturer of this product. All trademarks and documents are the property of their respective owners and are provided for identification and informational.