ABB 1SAM201902R1001 HK1-11 Dextra 1 NO + 1 NC Contactus Auxiliaris

Conspectus

ABB Accessoria pro Motoris Initiatoribus Manualibus

1SAM201902R1001 HK1-11 Dextra Pars: 1 NO + 1 NC Contactus Auxiliaris

Blocus auxiliaris ABB HK1-11 montatus in latere, cum uno contactu normaliter aperto et uno normaliter clauso, ad significationem status et ad connexionem regulandam initiatoris motoris.

Ad Primum Aspectum

Nota	ABB
Modellum	1SAM201902R1001
Typus Producti	Accessorium contactus auxiliaris
Functio principalis	Secundum statum principalium contactuum initiatoris motoris
Applicatio	Manuales initiatores motoris ABB MS116 et MS132

Installatio in parte dextra

Blocus auxiliaris montatur in parte dextra initiatoris motoris manualis compatibilis.

Main-contact following

The auxiliary contacts change position together with the starter main contacts.

Voltage-specific duties

AC-15 and DC-13 operating-current ratings differ by control voltage.

Product Overview

1SAM201902R1001 extends a compatible ABB manual motor starter with an HK1-11 auxiliary contact arrangement.

One normally open and one normally closed path follow the main-contact state for interlocking or indication circuits, while screw terminals provide the field-wire connections.

Focus ordinandi: Select an HK1 auxiliary block for main-contact status rather than a dedicated trip-signaling block, and retain the correct starter attachment and contact arrangement.

Key Functions

Follow starter operation

The auxiliary contacts change position with the main contacts of the manual motor starter.

Provide complementary control paths

Unus contactus normaliter apertus et unus contactus normaliter clausus adiuvant signa status necessaria schematis de controllo.

Finire le circuito ausiliario

Coniunctiones per vitam M3 utuntur praeparatione conductoris specificata et momento torsionis adstringendi.

Official Specifications

Disposizione dei contatti	1 NA + 1 NC
Tension assignée de service	690 V AC aut 600 V DC
Currentus thermalis conventionalis in aere libero	6 A
Frequentia censita	50/60 HZ
Tensione impulsiva subita evaluata	6 kV
Tensionis insulatio evaluata	690 V AC
Gradus Contaminations	3
Operans ambientium temperatus	−25 ad +70 °C
Temperatura ambientalis servandae	−50 ad +80 °C
Resistentia ad ictum	25 g pro 11 ms, IEC 60068-2-27
Tempus operis	100%
Durabilitas Mechanica et Electrica	50 000 cycli singuli
Capacitas coniunctionis conductoris rigidi	1 aut 2 × 1–1,5 mm²
Capacitas coniunctionis conductoris flexibilis	1 aut 2 × 0.75–1.5 mm², cum aut sine ferrulis
Longitudo Exscindendae Partis Filii	8 mm
Par de torsion pro terminalibus	0,8–1,2 N·m
Vitus terminalis et instrumentum	M3; Pozidriv 2
AC-15 currentes operativi	6 A ad 24/120 V; 4 A ad 240 V; 3 A ad 400 V; 1 A ad 440/690 V
DC-13 currentes operativi	2 A ad 24 V; 0.55 A ad 125 V; 0.27 A ad 250 V; 0.15 A ad 440/600 V
Conditiones minimae commutandae	17 V et 5 mA

Fons officialis: Catalogus technicus accessorum ABB pro motoribus incipientibus · Directivum ordinandi accessoria protectionis motorum ABB

Quaestiones Frequenter Rogatae

Num 1SAM201902R1001 indicat solummodo trip fault motoris incipientis?

Non, contactus auxiliarii HK1 sequuntur contactus principales starteris potius quam signum trip-only dedicatum praebent.

Quae pars starteris motoris manualis 1SAM201902R1001 accipit?

Blox auxiliare lateriter in parte dextra montatur.

Potestne 1SAM201902R1001 viam controllem tam apertam quam clausam praebere?

Ita, blox unum contactum normaliter apertum et unum normaliter clausum habet.

Quantam insulationem ab conductoribus pro 1SAM201902R1001 removere debeo?

Singulos conductores ad longitudinem specificatam 8 mm exspoliare debes.

Quod instrumentum et quod momentum ad usum in vitiis terminalibus 1SAM201902R1001 utendum est?

Instrumentum Pozidriv 2 in terminalibus M3 utere et ad momentum 0,8–1,2 N·m constringe.

Potestne 1SAM201902R1001 onerem controllem AC-15 5 A ad 240 V commutare?

No, the AC-15 operating-current rating at 240 V is 4 A.

Is 1SAM201902R1001 suitable for a very low-level 5 V signal circuit?

No, the specified minimum switching conditions are 17 V and 5 mA.

Compatibility & Ordering Notes

Before ordering 1SAM201902R1001: Retain the HK1-11 main-contact-following function, right-side attachment and one-NO/one-NC schematic, and select the circuit rating for the actual utilization category and voltage.

Compatibility Checklist for 1SAM201902R1001

• Match the MS116 or MS132 starter attachment.
• Use an appropriate trip-signaling accessory if a trip-only signal is required.
• Strip auxiliary conductors to 8 mm.
• Apply the 0.8–1.2 N·m terminal torque.

Hot Selling Models