EN
Bently Nevada 330876-01-10-00-00 3300 XL 50 mm Probe
Manufacturer: Bently Nevada
Product Family: 3300 XL 50 mm Proximity Transducer System
Product Type: Proximity Probe
Ordering Code: 330876-01-10-00-00
Official Datasheet: 174014 Rev. L
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
330876-01-10-00-00 50 mm Proximity Probe
Official ordering-code identification and specifications for a configured Bently Nevada 3300 XL 50 mm proximity probe, prepared from Datasheet 174014 Rev. L.
At a Glance
| Ordering Code | 330876-01-10-00-00 |
|---|---|
| Manufacturer | Bently Nevada |
| Product Family | 3300 XL 50 mm |
| Product Type | Proximity Probe |
| Probe Case | 1/2-20 threaded straight-exit case |
| Total Length | 1.0 m (3.3 ft) |
Exact Identification
Match the complete 330876-01-10-00-00 ordering code and photographed nameplate before replacement.
Configured Options
Option 01 probe case, option 10 total length, option 00 FluidLoc cable and option 00 no approvals.
System Role
Probe component for the complete 3300 XL 50 mm differential-expansion or rotor-expansion transducer system.
Product Overview
330876-01-10-00-00 is a configured Bently Nevada 3300 XL 50 mm proximity probe. The official ordering structure identifies a 1/2-20 threaded probe case, 1.0 m total length, High Temperature FluidLoc cable and no agency approvals.
When combined with the matching 3300 XL 50 mm extension cable and Proximitor Sensor, the complete system provides a 27.9 mm (1100 mil) linear range with a nominal average scale factor of 0.394 V/mm (10 mV/mil).
Key Functions
Long-Range Differential Expansion Measurement
The complete 3300 XL 50 mm system is designed for differential expansion or rotor expansion measurements on large steam turbine generators.
High-Temperature Sealed Probe
The probe uses High Temperature FluidLoc cable and is rated from -35°C to +200°C, with short-term exposure to +250°C for less than 24 hours.
Complete-System Compatibility
The probe must be used with the matching 3300 XL 50 mm extension cable and Proximitor Sensor; previous-system components are not mixed during an upgrade.
Official Specifications
| Manufacturer | Bently Nevada |
|---|---|
| Product Family | 3300 XL 50 mm Proximity Transducer System |
| Ordering Code | 330876-01-10-00-00 |
| Component Type | 3300 XL 50 mm Proximity Probe |
| Probe Case Option | 01 — 1/2-20 thread |
| Total Length Option | 10 — 1.0 m (3.3 ft) |
| Armor Option | 00 — High Temperature FluidLoc cable |
| Agency Approval Option | 00 — No approvals |
| Probe Case Diameter | 1.99 in |
| Complete-System Linear Range | 27.9 mm (1100 mils) |
| Complete-System Scale Factor | 0.394 V/mm (10 mV/mil), nominal |
| Probe Temperature | -35°C to +200°C; short-term +250°C for less than 24 hours |
Official sources: Bently Nevada Proximity Sensors and 3300 XL 50 mm Datasheet 174014 Rev. L. Commercial stock, warranty and shipping statements are seller terms.
Frequently Asked Questions
What is 330876-01-10-00-00?
It is a configured Bently Nevada 3300 XL 50 mm proximity probe for the 3300 XL 50 mm Proximity Transducer System.
How is 330876-01-10-00-00 configured?
The code specifies a 1/2-20 threaded case, 1.0 m total length, High Temperature FluidLoc cable and no agency approvals.
What does the complete 3300 XL 50 mm system measure?
It is intended for long-range differential expansion or rotor expansion measurement on large steam turbine generators.
What is the operating temperature of the probe?
The official probe range is -35°C to +200°C, with short-term exposure to +250°C for less than 24 hours.
Can this probe be mixed with older 7200 components?
No. Although the system supports upgrade applications, the probe, extension cable and Proximitor Sensor must all be replaced with 3300 XL 50 mm components.
Compatibility & Ordering Notes
Compatibility Checklist for 330876-01-10-00-00
- Match the 330876-01-10-00-00 nameplate without shortening the code.
- Use a matching 3300 XL 50 mm extension cable and 3300 XL 50 mm Proximitor Sensor.
- Confirm the extension-cable length plus probe length matches the Proximitor Sensor system length.
- Verify target material, mounting bracket and installation geometry against official system documentation.
- Do not mix 3300 XL 50 mm components with components from previous 7200 50 mm systems.
