EN
Bently Nevada 146054-034-20-02-05 3300 Ceramic Capped Probe
Manufacturer: Bently Nevada
Product Family: 3300 Ceramic Capped Probe
Product Type: Proximity Probe
Article Number: 146054-034-20-02-05
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Product Overview
- Key Functions
- Official Specifications
- Frequently Asked Questions
- Compatibility & Ordering Notes
- Hot Selling Models
- Recommended Products
Overview
146054-034-20-02-05 Proximity Probe
Official Bently Nevada ordering-code interpretation and specifications for 146054-034-20-02-05.
At a Glance
| Ordering Code | 146054-034-20-02-05 |
|---|---|
| Manufacturer | Bently Nevada |
| Product Family | 3300 Ceramic Capped Probe |
| Product Type | Forward-Mount Proximity Probe |
| Probe Thread | 3/8-24 UNF |
| Total Length | 2.0 m (6.6 ft) |
Product Overview
146054-034-20-02-05 is a Bently Nevada 3300 Ceramic Capped Probe with a 3/8-24 UNF forward-mount thread and without armor.
The official code resolves as 3.4 in overall case length, 2.0 m total probe length, miniature coaxial ClickLoc connector with standard cable, and the 05 agency-approval option.
Bently Nevada developed this ceramic-capped design for applications where the front of the probe case is exposed to corrosive gases or liquids. The ceramic-to-metal front interface is helium leak tested.
Key Functions
Probe Tip
Alumina ceramic (Al₂O₃).
Probe Case
AISI 304 stainless steel.
Linear Range
1.52 mm (60 mils), approximately 0.25 to 1.78 mm from the target.
Recommended Gap
1.0 mm (40 mils); gap electrically and avoid mechanical contact with the target.
Cable
75 Ω coaxial FEP-insulated standard probe cable.
Pressure Capability
Official product information rates the ceramic-capped probe to 34 bar (500 psi); higher-pressure modifications are available.
Official Specifications
| Manufacturer | Bently Nevada, a Baker Hughes business |
|---|---|
| Ordering Code | 146054-034-20-02-05 |
| Base Probe | 146054, 3/8-24 UNF, without armor |
| Overall Case Length Option | 034 = 3.4 in |
| Total Length Option | 20 = 2.0 m (6.6 ft) |
| Connector / Cable Option | 02 = Miniature coaxial ClickLoc connector, standard cable |
| Agency Approval Option | 05 = CSA, ATEX, IECEx |
| Probe Tip Material | Alumina ceramic (Al₂O₃) |
| Probe Case Material | AISI 304 stainless steel |
| Linear Range | 1.52 mm (60 mils) |
| Recommended Gap | 1.0 mm (40 mils) |
| Cable Type | 75 Ω coaxial, FEP insulated |
| Thread Engagement Limit | 0.563 in maximum for 3/8-24 thread |
| Official Document | 3300 Ceramic Capped Probe Datasheet 172932 Rev. J |
Frequently Asked Questions
What is 146054-034-20-02-05?
It is a Bently Nevada 3300 Ceramic Capped forward-mount proximity probe with a 3/8-24 UNF thread and a fully specified ordering configuration.
What does 034 mean in the ordering code?
For probe 146054, option 034 specifies a 3.4 in overall case length.
What does the 20 option specify?
Option 20 specifies a 2.0 m (6.6 ft) total probe length.
Which connector does this probe use?
Option 02 is the miniature coaxial ClickLoc connector with standard cable.
What approvals are represented by 05?
The official ordering table identifies 05 as the CSA, ATEX and IECEx agency-approval option.
Why is the probe ceramic capped?
Bently Nevada designed the ceramic front end for exposure to corrosive gases or liquids; the ceramic-to-metal interface is helium leak tested.
How should the probe be gapped?
The official recommended setting is 1.0 mm (40 mils). Gap electrically and avoid contact between the ceramic tip and the target.
Which official document covers this code?
Baker Hughes/Bently Nevada Datasheet 172932 Rev. J contains the specifications and ordering table for probe 146054.
Compatibility & Ordering Notes
Compatibility Checklist
- Match the complete code 146054-034-20-02-05; each field changes a physical or approval configuration.
- Confirm 3.4 in case length and 2.0 m total length against the installed geometry.
- Observe the official 0.563 in maximum thread-engagement limit for the 3/8-24 thread.
- Gap the probe electrically to 1.0 mm and avoid direct mechanical load on the ceramic tip.
- Verify ClickLoc connector compatibility and required site approvals before installation.
