EN
Siemens 6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA Two-Position Carrier Module
Manufacturer: Siemens
Condition: Brand New
Lead Time: In Stock
Origin: Germany
Warranty: 12 Months
Email: [email protected]
whatsApp: +86-18150117685
- Overview
- Hot Selling Models
- Recommended Products
Overview
- Use this carrier for I/O positions in an ET 200SP HA station.
- Match the terminal-block widths and required I/O positions to the carrier layout.
- Install and interlock the carrier chain before fitting the terminal blocks.
- Remove the transport lock and align the carriers before tightening the fixing screws.
- Plan 45 mm installed width and the stated height and depth.
- Apply the +70 °C horizontal or +60 °C vertical upper operating limit.
6DL1193-6GA00-0NN0 SIMATIC ET 200SP HA Two-Position Carrier Module
A two-position ET 200SP HA carrier for building the modular I/O assembly, with asset I&M data, potential-group support and a 45 mm installed width.
At a Glance
| Brand | Siemens |
|---|---|
| Model | 6DL1193-6GA00-0NN0 |
| Product Type | I/O carrier module |
| Core Function | Providing mechanical support and backplane continuity |
| Application | ET 200SP HA terminal-block and I/O assemblies |
Modular I/O support
The carrier combines with the terminal blocks to create the I/O slots.
Installed width
The installed carrier width is 45 mm; the loose component is 52.5 mm wide.
Station assembly
Carrier modules are connected in order before the terminal blocks are fitted.
Product Overview
6DL1193-6GA00-0NN0 forms the two-position carrier portion of an ET 200SP HA I/O assembly, providing the mechanical and electrical connection used with the selected terminal blocks.
The carrier supports potential groups and asset I&M data, with separate insulation test values for the backplane, supply groups and functional-ground interfaces.
Key Functions
Build the I/O positions with the terminal blocks
The carrier and the selected terminal blocks together create the mechanical and electrical slots for the I/O modules.
Continue the carrier and backplane assembly
The carrier is joined to the component on its left using the interlocks before its fixing screws secure it to the rail.
Provide asset and isolation features
Asset I&M data and the specified electrical-separation interfaces support the completed HA station assembly.
Official Specifications
| Number of I/O Positions | 2 |
|---|---|
| Identification and Maintenance Data | Asset I&M data supported |
| Backplane-to-Supply Isolation Test | 4200 V DC for 1 minute, type test |
| Supply-Group Separation Test | 3510 V AC for 5 seconds, type test |
| Backplane-to-Functional-Ground Test | 1500 V DC for 1 minute, type test |
| Horizontal Operating Temperature | −40 to +70 °C |
| Vertical Operating Temperature | −40 to +60 °C |
| Dimensions and Installed Width | 52.5 × 203 × 79 mm; width when installed 45 mm |
| Approximate Weight | 111 g |
Frequently Asked Questions
Is 6DL1193-6GA00-0NN0 the carrier for the station interface module?
This article is the carrier for I/O positions rather than the separate carrier used for interface modules.
Should I fit terminal blocks before joining 6DL1193-6GA00-0NN0 to the carrier chain?
Install the carrier modules one after another before starting terminal-block installation.
Why does the loose width of 6DL1193-6GA00-0NN0 differ from the installed width?
The component is 52.5 mm wide before assembly and occupies 45 mm when installed.
Can I create complete I/O slots using 6DL1193-6GA00-0NN0 without terminal blocks?
The I/O slots are created by combining the carrier module with the selected terminal blocks.
How should I align 6DL1193-6GA00-0NN0 with the neighboring carriers before tightening it?
Latch several carriers onto the rail and join them with the interlocks before tightening the fixing screws.
Can I use 6DL1193-6GA00-0NN0 vertically at 70 °C?
The vertical operating limit is +60 °C, while horizontal installation permits up to +70 °C.
Does 6DL1193-6GA00-0NN0 support identification data for asset records?
The carrier supports asset identification and maintenance data.
