330910-00-15-10-02-00 3300 NSv Proximity Probe

Overview

Place of Origin:	USA
Brand Name:	Bently Nevada
Model Number:	330910-00-15-10-02-00
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Quick Detail

Description

The 330910-00-15-10-02-00 3300 NSv Proximity Probe is an eddy-current displacement sensor used in industrial automation protection systems for compressors, turbines, and pumps. The 330910-00-15-10-02-00 3300 NSv Proximity Probe has a 150 mm overall case length, M10×1 thread, and AISI 304 stainless steel body for installation through deep bearing housings. Its PPS probe tip and 1.5 mm linear range allow the 330910-00-15-10-02-00 3300 NSv Proximity Probe to measure shaft radial vibration and axial movement with a recommended 1.0 mm gap.

The 330910-00-15-10-02-00 3300 NSv Proximity Probe includes a 1.0 m cable and miniature coaxial ClickLoc connector for wiring (0.2–1.5 mm²). Output resistance is 50 Ω and supply sensitivity is less than 2 mV/V, enabling direct signal input to DCS or PLC monitoring modules. Operating from −52 °C to +177 °C, the 330910-00-15-10-02-00 3300 NSv Proximity Probe provides displacement, keyphasor, and rotor position signals for rotating equipment shutdown logic and machine protection panels.

Applications

Install 330910-00-15-10-02-00 3300 NSv Proximity Probe inside deep compressor bearing housing
The 150 mm probe body allows the 330910-00-15-10-02-00 3300 NSv Proximity Probe to reach the shaft through thick machine casings. With a 1.5 mm linear range and 1.0 mm gap, the probe sends radial vibration displacement to a monitoring rack.

Measure thrust position on steam turbine rotor
Facing the thrust collar, the 330910-00-15-10-02-00 3300 NSv Proximity Probe outputs axial position voltage to PLC protection logic. The 50 Ω output resistance allows direct connection to protection modules.

Monitor pump shaft movement in narrow installation space
Using the M10×1 threaded case and PPS tip, the 330910-00-15-10-02-00 3300 NSv Proximity Probe detects vibration on shafts smaller than 51 mm and sends displacement signals to DCS input channels.

Specifications

Competitive Advantage

Reach measurement target through thick bearing covers
The 150 mm case length allows the 330910-00-15-10-02-00 3300 NSv Proximity Probe to access recessed shaft locations where short probes cannot reach.

Operate in high temperature compressor area
With −52 °C to +177 °C operating range and stainless steel case, the 330910-00-15-10-02-00 3300 NSv Proximity Probe can be installed near hot bearings and oil seals.

Send accurate displacement signal during power fluctuation
Supply sensitivity below 2 mV/V enables the 330910-00-15-10-02-00 3300 NSv Proximity Probe to keep correct voltage output for monitoring modules when cabinet voltage changes.

Keep wiring secured in vibrating equipment
The miniature coaxial ClickLoc connector locks the cable to the probe, so the 330910-00-15-10-02-00 3300 NSv Proximity Probe maintains electrical connection in rotating machinery environments.

Connect directly to standard 3300 monitoring systems
With a 7.87 V/mm scale factor, the 330910-00-15-10-02-00 3300 NSv Proximity Probe feeds displacement data into existing Bently monitoring racks without recalibration.