130118-0050-02 Proximity Probes

Overview

Place of Origin:	USA
Brand Name:	Bently Nevada
Model Number:	130118-0050-02
Packaging Details:	Original new Factory Sealed
Delivery Time:	5-7 days
Payment Terms:	T/T
Supply Ability:	In stock

Quick Detail

Description

130118-0050-02 Proximity Probes are eddy current proximity sensors designed for industrial automation and rotating machinery monitoring. The 130118-0050-02 provides a measurement range of 0 to 5 mm with 200 mV/mil sensitivity (7.87 mV/µm), delivering proportional analog voltage output through a -24 Vdc proximitor supply. With a frequency response of 0 to 10 kHz, 130118-0050-02 supports high-speed shaft vibration and position detection in turbines, compressors, and motors.

The 130118-0050-02 features 80% linear range accuracy, ±0.02 mm repeatability, and resolution better than 0.001 mm for precise displacement tracking. Built with a PPS probe tip and AISI 303 stainless steel case, 130118-0050-02 withstands operating temperatures from -40°C to +70°C and vibration up to 50 g peak. The 5.0 meter coaxial cable with optional armor ensures secure signal transmission in automation cabinets.

With IP67 protection at the probe tip and 100 g shock rating, 130118-0050-02 is suitable for harsh industrial environments requiring continuous shaft position and vibration monitoring.

Applications

Application Measure Shaft Vibration from 0 to 5 mm

130118-0050-02 is used to measure shaft vibration within a 0 to 5 mm displacement range. With 200 mV/mil sensitivity and 0 to 10 kHz frequency response, 130118-0050-02 captures high-speed rotor movement in turbines and compressors. The ±0.02 mm repeatability of 130118-0050-02 allows maintenance teams to track vibration trends and compare measured displacement against alarm limits in monitoring systems.

Application Monitor Shaft Position with High Resolution

130118-0050-02 provides resolution better than 0.001 mm, enabling accurate shaft position measurement for thrust and radial monitoring. Powered by -24 Vdc through a proximitor, 130118-0050-02 outputs proportional analog voltage signals to control systems, allowing direct integration with vibration monitors and PLC input modules.

Application Install in High Temperature and High Vibration Areas

With an operating temperature range of -40°C to +70°C and vibration limit of 50 g peak, 130118-0050-02 is installed near rotating shafts in heavy industrial equipment. The stainless steel AISI 303 case and PPS probe tip allow 130118-0050-02 to operate continuously in harsh automation environments.

Specifications

Competitive Advantage

Competitive Advantage High Sensitivity Output for Accurate Signal Processing

The 200 mV/mil sensitivity of 130118-0050-02 generates strong signal amplitude over a 5 mm range, improving signal-to-noise ratio in long 5.0 meter cable installations. This output level allows monitoring modules to process displacement data with reduced signal loss.

Competitive Advantage Wide Frequency Response up to 10 kHz

130118-0050-02 supports 0 to 10 kHz frequency response, allowing detection of both low-speed shaft displacement and high-frequency vibration components. This range enables automation systems to capture imbalance, misalignment, and mechanical looseness conditions.

Competitive Advantage Rugged Construction for Industrial Mounting

130118-0050-02 features IP67 probe tip sealing, 100 g shock rating, and armored coaxial cable option. These parameters allow 130118-0050-02 to maintain accurate measurement during continuous machine operation, reducing sensor replacement frequency in high-load industrial applications.