EN
- Overview
- Specifications
- Description
- Applications
- Input Overvoltage Protection
- FAQ
- Recommended Products
Overview
Place of Origin: |
USA |
Brand Name: |
GE |
Model Number: |
IC695PSA140 |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
5-7 days |
Payment Terms: |
T/T |
Supply Ability: |
In stock |
Specifications
|
Model: |
IC695PSA140 |
|
Module Type: |
Power Supply |
|
Dimensions (HxWxD): |
7 x 13.2 x 13.6 cm |
|
Weight: |
0.52 kg |
|
Nominal Rated Voltage: |
120/240 VAC or 125 VDC |
|
Input Voltage Range AC: |
85 to 264 VAC |
|
Input Voltage Range DC: |
100 to 300 VDC |
|
Input Power (Max, Full Load): |
70 Watts maximum |
|
Inrush Current: |
4 Amps, 250 milliseconds maximum |
|
Output Power (Total Maximum): |
40 Watts maximum |
|
Output Power 5.1 VDC: |
30 Watts maximum |
|
Output Power 3.3 VDC: |
30 Watts maximum |
|
Output Voltage 24 VDC: |
19.2 VDC to 28.8 VDC |
|
Output Voltage 5.1 VDC: |
5.0 VDC to 5.2 VDC (5.1 VDC nominal) |
|
Output Voltage 3.3 VDC: |
3.1 VDC to 3.5 VDC (3.3 VDC nominal) |
|
Output Current 24 VDC: |
0 to 1.6 Amps |
|
Output Current 5.1 VDC: |
0 to 6 Amps |
|
Output Current 3.3 VDC: |
0 to 9 Amps |
|
Isolation (Input to Backplane): |
250 VAC continuous; 1500 VAC for 1 minute |
|
Ripple (All Outputs): |
150 mV |
|
Noise (All Outputs): |
150 mV |
|
Ride-Through Time: |
20 ms |
|
Wiring Terminals: |
Each terminal accepts one 14 AWG to 22 AWG wire |
|
Current per Terminal: |
6 Amps |
|
Max Number of Daisy-Chained PSA140 Supplies: |
Up to 4 |
|
Max Number of PSA140 Supplies in Universal Backplane: |
Up to 4 |
Description
Power Supply IC695PSA140 is a multi-purpose 40-Watt supply that operates from an input voltage source in the range of 85 to 264 VAC or 100 VDC to 300 VDC.
This power supply provides three outputs:
+5.1 VDC output,
+24 VDC relay output that can be used to power circuits on Output Relay modules.
+3.3 VDC. This output is used internally by RX3i modules with IC695 catalog numbers.
This Power Supply is suitable for use in load-sharing and redundancy applications. Up to 4 Multi-purpose power supplies (PSA140 and/or PSD140) can be used in a PACSystems RX3i (IC695 catalog number) Universal Backplane. Use these Power Supplies if the number of modules required exceeds the capacity of one Power Supply. This Power Supply occupies two backplane slots.
Applications
Oil and Gas (Refineries/Offshore Platforms): Supports dual power supply redundancy, ensuring PLC operation continues even if one power module fails.
Automotive Manufacturing Plants (Painting/Welding Lines): Provides sufficient current for large racks housing numerous I/O and high-speed communication modules.
Large Water Treatment Plants: Ensures high-stability, 24/7 operation in critical pump station monitoring systems.
Input Overvoltage Protection
The bottom terminal is normally connected to frame ground with a user-installed jumper as shown at lower right. If overvoltage protection is not required or is supplied upstream, no jumper is required. To Hi-pot test this supply, overvoltage protection must be disabled during the test by removing the jumper. Re-enable overvoltage protection after testing by reinstalling the jumper.
FAQ
Q: Does the IC695PSA140 come with a warranty?
A: Yes, the IC695PSA140 includes a 1-year warranty.
Q: What is the input supply voltage requirement of the IC695PSA140?
A: It is operated by an external supply voltage of 85 to 264 VAC and 100–300 VDC.
Q: What is the output power rating of the IC695PSA140?
A: The IC695PSA140 has an output power rating of 40 Watts.
Q: What is the maximum number of IC695PSA140 installation instances in one RX3i baseplate?
A: One (1) RX3i baseplate may be installed with up to four (4) power supplies.
Q: With what can IC695PSA140 not be used?
A: This power supply cannot be used with other RX3i power supplies in redundant or increased capacity modes.
Q: What is an IC695PSA140?
A: The IC695PSA140 is a Multi-Purpose Power Supply from the GE Fanuc RX3i Series.
