EN
- Overview
- Specifications
- Description
- Applications
- Operating Procedures
- FAQ
- Recommended Products
Overview
Place of Origin: |
USA |
Brand Name: |
ICS TRIPLEX |
Model Number: |
TC-308-02 |
Packaging Details: |
Original new Factory Sealed |
Delivery Time: |
5-7 days |
Payment Terms: |
T/T |
Supply Ability: |
In stock |
Specifications
|
Parameter |
Value |
|
Part Number |
TC-308-02 |
|
Part Name |
Output Smart Slot Jumper Cable |
|
Cable Type |
56-way LSZH wire harness or UL certified wire harness (Megamide sleeving; TC-308-02 / TC-308-03 variant) |
|
Insulation / Shielding |
High-grade low smoke zero halogen (LSZH) |
|
Fire Performance Standard |
IEC 60332-3 Cat A |
|
Compatible Output Channels |
40-channel or 60-channel Trusted TMR analog/digital output modules |
|
Wire Harness Structure |
96-core shielded cable assembly |
|
Module End Connector (SKT1) |
96-pin C-type connector (Type C) |
|
Field / Fault Output End Connector |
96-pin R-type connector (Type R) |
|
Rated Voltage |
150 V DC |
|
Certification |
Ordinary Locations |
|
Application |
Smart Slot interconnection cable for Trusted output systems |
Description
TC-308-02 Output Smart Slot Jumper Cable is designed for reliable I/O connection between a faulty Trusted Digital Output module (40-channel) and the SmartSlot module within a Trusted Controller or Expander chassis. It enables fast replacement and signal continuity during maintenance or module failure scenarios.
Applications
Rail Transit Control Plants: LSZH flame-retardant design ensures high fire safety in enclosed signal rooms.
Semiconductor Wafer Plants: Supports high-density output modules for seamless smart slot switching in cleanroom cabinets.
LNG Processing Plants: Wear-resistant sleeve handles mechanical stress in central control areas.
Petrochemical Plants: Ensures continuous signal flow during hot-swap in SIS output modules.
Biopharmaceutical Plants: Low-toxicity materials meet strict clean and safety requirements in control rooms.
Operating Procedures
Pre-Replacement Check: Before using TC-308-02, test 96-pin jumper pins for open/short circuits to avoid 24V trips or valve faults.
Grounding Connection: Ensure Type C grounding braid is firmly connected to rack busbar before insertion to suppress back EMF and ensure TMR voting accuracy.
Replacement Sequence: Follow system wizard—activate Smart Slot replacement mode first, then insert cable, then remove old card.
FAQ
Q: What is the structural difference between TC-308-02 and TC-308-03 output jumper cables?
A: TC-308-02 uses 56-core LSZH wiring; TC-308-03 uses UL-certified 56-core wiring. Both use Megamide sleeving.
Q: What is the maximum rated voltage of TC-308-02 in DC control circuits?
A: Up to 150Vdc for industrial digital/analog output circuits.
Q: Why is TC-308-02 required for Smart Slot hot-swap maintenance?
A: It bridges signals to standby slots during module removal, preventing actuator misoperation.
Q: How does TC-308-02 resist EMI signal distortion?
A: Uses 96-core LSZH shielding with full coverage braid to block high-frequency EMI.
Q: How are Type C and Type R connectors used during switching with TC-308-02?
A: Type C (SKT1) connects to Smart Slot; Type R connects to fault or field output module.
